Translators Project Settings
The built-in translators are extensions that open up an element to work with Test Studio and thus allow interaction with the Elements Menu exposing a rich set of verification tasks.
This section of the Project Settings allows you to adjust the version of the Telerik and Kendo UI components used to build the application under test and lets Test Studio apply the matching translators. From this menu you can review and disable/enable the components for which a translator is available.
- Choose the correct version of translators used in the tested application
- How to find out which is the correct version
- Mapping of translators versions to the Test Studio releases
- Find out which components are covered by translators in Test Studio
Select the Version of the Telerik Components under Test
The Telerik Components Under Test section lets you instruct the translators' version to match the version of the UI components in the tested page for this project. This setting applies to both the recording and quick execution flows and allows you to smoothly create tests and run these for various applications. The same setting is exposed in the test list settings and can be set individually per test list.
Note!
Test Studio supports the latest version of Telerik and Kendo UI components, as well as versions released within the past two years.
All previous versions are marked with * to indicate these are no longer supported. You can continue using these archived versions but in case any misbehavior is identified it will not be addressed.
How to Know Which is the Version of Components Used in the Tested Page?
As Quality Assurance Engineer you often don't know what type and version of UI components was used to create the application you need to automate. And since there is no convenient way to identify the version of the components in an already built and deployed application, the most reliable approach is to contact the development team and discuss the topic internally.
Test Studio Mapping to UI Components Versions
Find the versions of the supported UI components matching the translators versions from the lists.
Telerik UI for Blazor
| Release | Version |
|---|---|
| R32021 | 2.27.0 |
| R12022 | 3.0.0 |
| R12022SP1 | 3.1.0 |
| R22022 | 3.3.0 |
| R22022SP1 | 3.4.0 |
| R32022 | 3.6.0 |
| R12023 | 4.0.0 |
| R12023SP1 | 4.1.0 |
| R22023 | 4.3.0 |
| R32023 | 4.6.0 |
| R22024 | 6.0.0 |
| R22024SP1 | 6.0.2 |
| R42024 | 7.0.0 |
| R22025 | 9.0.0 |
Telerik UI for ASP.NET AJAX
| Release | Version |
|---|---|
| R32021 | 2021.3.914 |
| R12022 | 2022.1.119 |
| R12022SP1 | 2022.1.302 |
| R22022 | 2022.2.511 |
| R22022SP1 | 2022.2.622 |
| R32022 | 2022.3.913 |
| R12023 | 2023.1.117 |
| R12023SP1 | 2023.1.314 |
| R22023 | 2023.2.606 |
| R32023 | 2023.3.1010 |
| R22024 | 2024.2.513 |
| R22024SP1 | 2024.3.805 |
| R42024 | 2024.4.1113 |
| R22025 | 2025.2.528 |
Kendo UI for jQuery
| Release | Version |
|---|---|
| R32021 | 2021.3.914 |
| R12022 | 2022.1.119 |
| R12022SP1 | 2022.1.301 |
| R22022 | 2022.2.510 |
| R22022SP1 | 2022.2.621 |
| R32022 | 2022.3.913 |
| R12023 | 2023.1.117 |
| R12023SP1 | 2023.1.314 |
| R22023 | 2023.2.606 |
| R32023 | 2023.3.1010 |
| R22024 | 2024.2.514 |
| R22024SP1 | 2024.2.514 |
| R42024 | 2024.4.1112 |
| R22025 | 2025.2.528 |
Kendo UI for Angular
| Release R32021 | ||
|---|---|---|
| Translator Name | Component Name | Component Version |
| KendoAngularAutoComplete | kendo-angular-dropdowns | 5.4.0 |
| KendoAngularButton | kendo-angular-buttons | 6.3.0 |
| KendoAngularComboBox | kendo-angular-dropdowns | 5.4.0 |
| KendoAngularDialog | kendo-angular-dialog | 5.1.1 |
| KendoAngularDropdownList | kendo-angular-dropdowns | 5.4.0 |
| KendoAngularGrid | kendo-angular-grid | 5.4.0 |
| KendoAngularInputs | kendo-angular-inputs | 7.4.0 |
| KendoAngularPager | kendo-angular-pager | 1.0.0 |
| KendoAngularPanelBar | kendo-angular-layout | 6.3.0 |
| KendoAngularSwitch | kendo-angular-inputs | 7.4.0 |
| KendoAngularTabStrip | kendo-angular-layout | 6.3.0 |
| KendoAngularWindow | kendo-angular-dialog | 5.1.1 |
| Release R12022 | ||
|---|---|---|
| Translator Name | Component Name | Component Version |
| KendoAngularAutoComplete | kendo-angular-dropdowns | 6.0.0 |
| KendoAngularButton | kendo-angular-buttons | 7.0.0 |
| KendoAngularComboBox | kendo-angular-dropdowns | 6.0.0 |
| KendoAngularDialog | kendo-angular-dialog | 6.0.0 |
| KendoAngularDropdownList | kendo-angular-dropdowns | 6.0.0 |
| KendoAngularGrid | kendo-angular-grid | 6.0.0 |
| KendoAngularInputs | kendo-angular-inputs | 8.0.0 |
| KendoAngularPager | kendo-angular-pager | 3.0.0 |
| KendoAngularPanelBar | kendo-angular-layout | 6.4.0 |
| KendoAngularSwitch | kendo-angular-inputs | 8.0.0 |
| KendoAngularTabStrip | kendo-angular-layout | 6.4.0 |
| KendoAngularWindow | kendo-angular-dialog | 6.0.0 |
| Release R12022SP1 | ||
|---|---|---|
| Translator Name | Component Name | Component Version |
| KendoAngularAutoComplete | kendo-angular-dropdowns | 6.0.1 |
| KendoAngularButton | kendo-angular-buttons | 7.0.3 |
| KendoAngularComboBox | kendo-angular-dropdowns | 6.0.1 |
| KendoAngularDialog | kendo-angular-dialog | 6.0.2 |
| KendoAngularDropdownList | kendo-angular-dropdowns | 6.0.1 |
| KendoAngularGrid | kendo-angular-grid | 6.1.0 |
| KendoAngularInputs | kendo-angular-inputs | 8.0.7 |
| KendoAngularPager | kendo-angular-pager | 3.0.2 |
| KendoAngularPanelBar | kendo-angular-layout | 6.5.1 |
| KendoAngularSwitch | kendo-angular-inputs | 8.0.7 |
| KendoAngularTabStrip | kendo-angular-layout | 6.5.1 |
| KendoAngularWindow | kendo-angular-dialog | 6.0.2 |
| Release R22022 | ||
|---|---|---|
| Translator Name | Component Name | Component Version |
| KendoAngularAutoComplete | kendo-angular-dropdowns | 7.0.1 |
| KendoAngularButton | kendo-angular-buttons | 8.0.0 |
| KendoAngularComboBox | kendo-angular-dropdowns | 7.0.1 |
| KendoAngularDialog | kendo-angular-dialog | 7.0.0 |
| KendoAngularDropdownList | kendo-angular-dropdowns | 7.0.1 |
| KendoAngularGrid | kendo-angular-grid | 7.0.1 |
| KendoAngularInputs | kendo-angular-inputs | 9.0.1 |
| KendoAngularPager | kendo-angular-pager | 4.0.0 |
| KendoAngularPanelBar | kendo-angular-layout | 7.0.1 |
| KendoAngularSwitch | kendo-angular-inputs | 9.0.1 |
| KendoAngularTabStrip | kendo-angular-layout | 7.0.1 |
| KendoAngularWindow | kendo-angular-dialog | 7.0.0 |
| Release R22022SP1 | ||
|---|---|---|
| Translator Name | Component Name | Component Version |
| KendoAngularAutoComplete | kendo-angular-dropdowns | 7.0.2 |
| KendoAngularButton | kendo-angular-buttons | 8.0.0 |
| KendoAngularComboBox | kendo-angular-dropdowns | 7.0.2 |
| KendoAngularDialog | kendo-angular-dialog | 7.1.2 |
| KendoAngularDropdownList | kendo-angular-dropdowns | 7.0.2 |
| KendoAngularGrid | kendo-angular-grid | 7.2.0 |
| KendoAngularInputs | kendo-angular-inputs | 9.0.3 |
| KendoAngularPager | kendo-angular-pager | 4.0.0 |
| KendoAngularPanelBar | kendo-angular-layout | 7.1.0 |
| KendoAngularSwitch | kendo-angular-inputs | 9.0.3 |
| KendoAngularTabStrip | kendo-angular-layout | 7.1.0 |
| KendoAngularWindow | kendo-angular-dialog | 7.1.2 |
| Release R32022 | ||
|---|---|---|
| Translator Name | Component Name | Component Version |
| KendoAngularAutoComplete | kendo-angular-dropdowns | 7.2.0 |
| KendoAngularButton | kendo-angular-buttons | 8.1.0 |
| KendoAngularComboBox | kendo-angular-dropdowns | 7.2.0 |
| KendoAngularDialog | kendo-angular-dialog | 7.1.3 |
| KendoAngularDropdownList | kendo-angular-dropdowns | 7.2.0 |
| KendoAngularGrid | kendo-angular-grid | 7.3.1 |
| KendoAngularInputs | kendo-angular-inputs | 10.0.0 |
| KendoAngularPager | kendo-angular-pager | 4.0.5 |
| KendoAngularPanelBar | kendo-angular-layout | 7.1.3 |
| KendoAngularSwitch | kendo-angular-inputs | 10.0.0 |
| KendoAngularTabStrip | kendo-angular-layout | 7.1.3 |
| KendoAngularWindow | kendo-angular-dialog | 7.1.3 |
| Release | Version |
|---|---|
| R12023 | 11.0.0 |
| R12023SP1 | 11.4.0 |
| R22023 | 13.0.0 |
| R32023 | 14.0.0 |
| R22024 | 16.0.0 |
| R22024SP1 | 16.3.0 |
| R42024 | 17.0.1 |
| R22025 | 19.1.0 |
Available Translators
The Available Translators section lists all built-in translators that are currently available in Test Studio. All translators are enabled by default, which is the recommended setup. Each of the built-in translators can be disabled and not used while recording and executing tests, but we strongly recommend contacting the Test Studio Support Team before applying changes to the enabled translators.
