Hello,

I have a TestList that passes consistently when running thru the WebUI application, but fails when using my local PC as an execution server.  Five out of eight test failed.  The error on the failed test was similar to this:
 
'12/7/2010 5:04:42 PM' - System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Security.SecurityException: That assembly does not allow partially trusted callers.
   at FT_ACache_Run_Me_First..ctor()
The action that failed was:
LinkDemand
The assembly or AppDomain that failed was:
TestProject1, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null
The Zone of the assembly that failed was:
Intranet
The Url of the assembly that failed was:
file://fl27fil03/groups/test/CSRNG Automated TestProject1/Results/Non SR Tests - 129362366518254813/bin/TestProject1.DLL
   --- End of inner exception stack trace ---
   at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
   at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
   at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
   at System.Activator.CreateInstance(Type type, Boolean nonPublic)
   at ArtOfTest.WebAii.Design.Execution.ExecutionUtils.CreateCodedTestInstance(Test test, TestResult result)
   at ArtOfTest.WebAii.Design.Execution.ExecutionEngine.InternalExecuteTest(Test test, TestResult initializationResult)
   at ArtOfTest.WebAii.Design.Execution.TestExecuteProxy.ExecuteTest(Test test, Settings settings, String deploymentFolder, ExecutionType exeType, Int32 lastStepIndex, DebuggerOptions debuggerOptions)
------------------------------------------------------------
'12/7/2010 5:04:42 PM' - Test completed!

In the attachment, you can see the TestList failed twice at 4:49pm and 5:04pm.  These were scheduled test runs.  I ran the test list manually at 4:52 to verify it would work.  It passed.

Any help you can provide is appreciated.
thanks,
maria.

I created the tests in visual studio and set the base url there.  However, when I run the test from the command line, I get an error about the url.  Is there anyway to use the base url function when running the tests from the command line?

We have listview with edit, delete button.
I record and generate steps to add an element in the listview, then delete the element.

The problem is the delete link button is selected by the location in listview, not related to the content that I added.

followling is the Find Expression:
id=ctl00_ctlLeftMenu1_lvLeftMenu_ctrl0_rptMenuItem_ctl02_lbMenuItem,tagname=a

How can I change the Find Expression to make sure the element to delete is the element that just been added?

Thanks,
Yulan

Hi Telerik Team,

I am Evaluating the tool for Automation testing. Its a great tool with tiny vital features.
I am getting the following Error while opening a popup. popup is taking more time to load page elements,  Becuase tool is not able to find the element in pre-defined time, it closes the window and throwing the following error. 

Failure Information:
~~~~~~~~~~~~~~~
Exception thrown executing coded step: '[CreateCodeTest_CodedStep] : Connect to pop-up window : 'http://rsqaapp/AutomationTesting/Entity/EntityEditor.aspx', ConnectToPopup=True'.
InnerException:
System.OperationCanceledException: Exception occured waiting for the new browser to connect. ---> System.TimeoutException: Wait for condition has timed out
   at ArtOfTest.Common.WaitSync.CheckResult(WaitSync wait, String extraExceptionInfo)
   at ArtOfTest.Common.WaitSync.For[T](Predicate`1 predicate, T target, Boolean invertCondition, Int32 timeout)
   at ArtOfTest.WebAii.Core.Manager.WaitForNewBrowserConnect(String url, Boolean isPartial, Int32 timeout)
   --- End of inner exception stack trace ---
   at ArtOfTest.WebAii.Core.Manager.WaitForNewBrowserConnect(String url, Boolean isPartial, Int32 timeout)
   at Example1.CreateCodeTest.CreateCodeTest_CodedStep() in f:\Anshul\WebUI Test Studio Projects\Example1\CreateCodeTest.aii.cs:line 77
--------------------------------------------------
'11/29/2010 5:37:45 PM' - Detected a failure. Step is marked 'ContinueOnFailure=False' aborting test execution.
--------------------------------------------------
'11/29/2010 5:37:45 PM' - Overall Result: Fail
--------------------------------------------------

Thanks and Regards,
Anshul

Hi
I have a radpanel bar which I populate with question descriptions using a session object according to a cover type selected "e.g. Motor".

When the page first loads the radpanlebar populates correctly and I can work with no problems.

There after if  I change the cover type say to "Commercial"
It won't bind to the new session object it reverts back to the last lot of descriptions.

I have checked that the session has the new values required so that doesn’t seem to be the root of the problem.
I have tried binding in the page_init that also doesn’t work.

I checked the RadPanelProposal_ItemDataBound and the XmlElement for the data item doesn’t change according to the session object.
Any advice would be appreciated.

The session gets set as follows:
xmlDS.Data = "<Tasks>" & XmlString & "</Tasks>"
xmlDS.XPath = "/Tasks/Task"
xmlDS.ID = "QuestionsXml"
Session(QuoteQuestionGroups) = xmlDS

Hi,

Is there a simple, straightforward way of scheduling a test list to run at a specified time? The instructions in the blogs and Telerik TV are bit complicated (for me). I just need to run the test list in the same machine as where the Telerik WebUI Test Studio QA Edition is installed.

Regards,
Kristine

Hi,

           Browser is closed automatically at the time of recording the test. It is happenning continously when more Verifcations are used.
Then i want to again continue the recording for the test, its really wastes time and effort.

Ex: In my test i have created a reservation. For that i have used verification in popup window for more fields..at that time is is closed suddenly.

what is the way to resolve the problem ?.

thanks,

Hi,

            I have recorded a test with the following steps in the Telerik Web UI tool but its failed in deletion step.

1.created a reservation for an user.
2.Saved the reservation
3.Delete the reservation.
4.Execute the test, it is successfully run without error on the created day.
  While executing the test on the next day, it is failed with the 'Unable to locate the element' error in log in Deletion step.
When delete button is clicked in Calendar timeslot, it generates the step with an no(automatically generated by recorder)..this getting is changed automatically on next day.

So i rerecord the deletion step again , then it works fine. Its hectic for me to do this daily.

Please give me a solution for this.

thanks,

We are using the RadEditorSharePoint with the version 5.3.2.0__1f131a624888eeed.When we edit the dashboard unable to see the edit toolbar icons.This is causing confuse for the end users.Please find the attachment for more information.Please let me know.

With Regards
Vinod Giri

Hi,

         Validation error message for the mandatory field is not shown when it is leave as blank while executing the test. Instead it is showing the 'cannot locate the element' message and failed. Sometimes it is passed.

Give me a solution for this problem.

thanks,