This is a migrated thread and some comments may be shown as answers.

Before debuging 2009 read.

10 Answers 119 Views
General Discussions
This is a migrated thread and some comments may be shown as answers.
Christopher Bishop
Top achievements
Rank 2
Christopher Bishop asked on 12 Mar 2009, 06:20 PM
So I upgraded my project and it broke right out the gate do to the radtitlebar...
So I decided to remove it and readd it thinking maybe it was a link poblem...

Everytime i go to add it to the form all i get is a nice fat:
No such property registered: Image, Telerik.WinControls.UI.RadButtomItem

Ok so I never delete my debug/release folders because I normally have resources in them that
i want and/or dont want to rebuild my entire project. Upgrading is normally very easy with the upgrade tool
and what not but sometimes you fail to forget linkage problems and spend the next hour
trying to figure out why something isn't working.

If you are having a similar problem above and Clean doesn't work shut down your project and delete
your debug/release folders reopen the project and compile it will work fine there after.

I know this is pretty simple stuff but if you are like me the simple stuff gets over looked because I tend
to think of bigger problems :)

10 Answers, 1 is accepted

Sort by
0
Eddie
Top achievements
Rank 2
answered on 16 Mar 2009, 12:22 PM
Chris, thanks for the post!  I ran into a very similar issue and your suggestion cleaned things right up!  I'm sure it saved me lots of time that I would have otherwise spent trying all sorts of other things.

-Eddie
0
Nick
Telerik team
answered on 17 Mar 2009, 12:27 PM
Hello Chris,

Thank you for sharing that with the community. I have updated your Telerik points.

Best wishes,
Nick
the Telerik team


Instantly find answers to your questions on the new Telerik Support Portal.
Check out the tips for optimizing your support resource searches.
0
Fred
Top achievements
Rank 1
answered on 01 Jul 2009, 08:58 PM
  Hi,
  I'm having this exact problem too, but my installation is a fresh one, not an update.
  Anyway, i've done the steps described in the upgrade document and the steps described in this post without sucess.
  Can anyone help?

  Thanks in advance.
0
Christopher Bishop
Top achievements
Rank 2
answered on 01 Jul 2009, 09:04 PM
Fred,
I am guessing being in this forum you are talking about the winControls correct?
By fresh install do you mean you have never had Telerik installed before? 
Are you getting the error when you try and drag and drop a control onto the form?
Do you have the latest .NET framework installed?

Can you take a screenshot and post the steps to reproduce?

The orginal post on this we related to references not from a fresh install, although I have 
seen something similar with a fresh install but that was because of .NET versioning...
0
Fred
Top achievements
Rank 1
answered on 02 Jul 2009, 05:32 PM
Hi Christopher,
Thanks for the reply. Now to answer your questions:

"I am guessing being in this forum you are talking about the winControls correct?"
 yes.

"By fresh install do you mean you have never had Telerik installed before? "
Not the winforms controls, but i have installed the ajax and silverlight trial before this.

"Are you getting the error when you try and drag and drop a control onto the form?"
yes. All the controls except RadButton

"Do you have the latest .NET framework installed?"
yes

I don't know how to post a screenshot in the forums, but the the error is the same you posted before. The steps are simple too, since it is a test project, only the default form and when i try to drop a control it causes the error.

As an aditional info, the test project that came in the installation is presenting many errors (No such property registered) too.
0
Christopher Bishop
Top achievements
Rank 2
answered on 02 Jul 2009, 06:57 PM
Are you using 64bit Vista by any chance?
0
Fred
Top achievements
Rank 1
answered on 02 Jul 2009, 07:20 PM
I'm using windows xp 32 bits, Brazilian Portuguese version (pt-Br).
0
Christopher Bishop
Top achievements
Rank 2
answered on 02 Jul 2009, 07:25 PM
I can load up a virtual pc tommorow with your config and have a look, i just installed VS2008+SP, and Latest Telerik on a WindowsXP Dell XPS (never had vs or telerik on it) and it work as it should... So I will install a virtual machine on a test box with pt-br and see what happens will get back with you tommorow sometime.
0
Nick
Telerik team
answered on 07 Jul 2009, 12:53 PM
Hi guys,

If you still experience problems, you can open a new support ticket and send us your projects so that we can debug the applications and provide a fix.

All the best,
Nick
the Telerik team

Instantly find answers to your questions on the new Telerik Support Portal.
Check out the tips for optimizing your support resource searches.
0
Fred
Top achievements
Rank 1
answered on 07 Jul 2009, 07:04 PM
Hi,
Just installed Q2 release and now it works like magic :)
Tags
General Discussions
Asked by
Christopher Bishop
Top achievements
Rank 2
Answers by
Eddie
Top achievements
Rank 2
Nick
Telerik team
Fred
Top achievements
Rank 1
Christopher Bishop
Top achievements
Rank 2
Share this question
or