
You can see live Silverlight example at: http://demos.telerik.com/silverlight/salesdashboard
You can see live WPF example at: http://demos.telerik.com/wpf/salesdashboard
82 Answers, 1 is accepted

Other than that.. this is a great demo and showcases what can be done with your control suites. I would love to see a walkthrough whitepaper or KB on how this was created.


Error 1 The OutputPath property is not set for this project. Please check to make sure that you have specified a valid Configuration/Platform combination. Configuration='Debug XBAP' Platform='AnyCPU' Telerik.SalesDashboard.Shell.Desktop
Error 3 Cannot find project output file C:\Users\pkothari\Desktop\Telerik\Silverlight\Q12009\SP2\Telerik.SalesDashboard\Telerik.SalesDashboard.Shell\Bin\Debug XBAP\Telerik.SalesDashboard.Shell.xap. 0 0 Telerik.SalesDashboard.Web
Error 4 The referenced assembly "C:\Users\pkothari\Desktop\Telerik\Silverlight\Q12009\SP2\Telerik.SalesDashboard\Telerik.SalesDashboard.SalesStats.YearToDate\bin\Debug XBAP\Telerik.SalesDashboard.SalesStats.YearToDate.dll" was not found. If this assembly is produced by another one of your projects, please make sure to build that project before building this one. Telerik.SalesDashboard.Shell
Here is how to run the solutions:
WPF:
- open the Telerik.SalesDashboard_WPF solution
- make sure the build configuration is "Debug" and NOT "Debug XBAP"
- set the Telerik.SalesDashboard.Shell.Desktop project as the startup project
Silverlight:
- open the Telerik.SalesDashboard_SL solution
- make sure the build configuration is "Debug" and NOT "Debug XBAP"
- set the Telerik.SalesDashboard.Web project as the startup project
- set the Telerik.SalesDashboard.ShellTestPage.aspx page as the startup page
Note that you should have Telerik OpenAccess ORM installed on your machine in order to be able to build the solutions. Let me know if you have any problems with the solutions after you follow the above instructions.
As a side note, a whitepaper is actually being prepared and should be available early next week.
Sincerely yours,
Tihomir Petkov
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Check out the tips for optimizing your support resource searches.

{"Telerik.OpenAccess: No enhanced assembly has been found for meta-data construction. This may be caused by a missing app.config file (use app.config as embedded resource then) or by an insufficient references section in the configuration file (add the referenced enhanced assemblies there too) or by a wrong enhancement setting; please check your configuration."}
I have right clicked on the Telerik.SalesDashboard.Web project and updated the configuration file again. I also tried deleting the Telerik OpenAccess ORM references from the BIN folder and add them again from my installation inside Program Files.
I do have Telerik OpenAccess ORM installed.
Also, do you know a specific date when the whitepaper will be available. That will be very helpful as we evaluate these controls.
Pratik

http://www.telerik.com/community/forums/orm/orm-express/telerik-openaccess-orm-no-enhanced-assembly-has-been-found-for-meta-data-construction.aspx
Pratik

Pratik

Thank you,
Regards

Click on Download source code redirect us to downloading RadControls for Silverlight...
Is this ok?
Regards
Matjaž
Pratik, Bilal,
The whitepaper discussing the creation of the Telerik Sales Dashboard Demo and the usage of Prism is almost completed but still requires some more work and polishing. I expect we will be able to publish it next week. In the meanwhile if you have any specific questions regarding the use of our controls please do not hesitate to open a dedicated support ticket or forum thread and we will be happy to answer them.
Matjaž,
To download the source code for the Telerik Sales Dashboard Demo for Silverlight go to Your Account->Downloads and just below RadControls for Silverlight (which includes all controls and examples) there is another link which says "Source Code, Automatic Installation, Manual Installation, Examples..." - there you can choose to download only the Sales Dashboard Demo.
All the best,
Hristo
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Check out the tips for optimizing your support resource searches.

and can not see anything in xaml page design both SL and WPF .
In Page follwing message showing
-------------------------------
Problem Loading
The document contains error that must be fixed.....xxxxx
<reload the designer>
--------------------------------
and code window showing " StaticResource reference 'XXXXXX' was not found.
Can you please help me where i am missing things?
Regards
CKR
Thank you for reporting this. We will try to address this with the next update.
Sincerely yours,
Valentin.Stoychev
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Check out the tips for optimizing your support resource searches.

If I Click on download source for Silverlight Sales Dashboard
"http://www.telerik.com/account/free-trials/single-trial.aspx?pmvid=2009"
I am getting redirected to this page
http://www.telerik.com/server-error.aspx?aspxerrorpath=/sitefinity/cmsentrypoint.aspx
Please help or provide a link to download Sales Dashboard Sample for SL
Regards
Sachin
We are doing our best to update the source code to work against the latest official DLLs and I hope that we will upload the latest source code of the application in the next few days.
Kind regards,
Nick
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Check out the tips for optimizing your support resource searches.

Yes - you can download the sources. They are there for learning purposes. Let us know if you have any other questions.
Kind regards,
Valentin.Stoychev
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Check out the tips for optimizing your support resource searches.

thanks for the answer. When I look here: http://www.telerik.com/account/free-trials/single-trial.aspx?pmvid=2061, I don't see a download option for the Dashboard, all I see is Astoria Demo, Bugtracker Demo, Car Configurator Demo, Telerik Media Demo and Page Navigation Demos (next to the manual installation and dlls only). Which should I use then?
Thank you!
The source code of the DashBoard demo will be uploaded in the next few days. We currently finalizing the update process so that the example works against the latest official release - Q2 2009.
Greetings,
Nick
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Check out the tips for optimizing your support resource searches.




Its very nice Idea. I liked it. I updated my Client. He liked it more then me. We started with our existing silverlight project to WPF compatible. That is starting point of problem.
You do not have same control list in Silverlight & WPF. E.g. In sliverlight we have docking but In WPF :( ....
Same happened with Coverflow and many more.
Client is waiting to see the thing. I am stuck. Before I start banging my head on the wall. if you have any solution it would be great help.
We are working on porting the Docking component to WPF. It should be available with our Q3 release (begining of November). Beta version will be available ~1 month earlier.
As for the Coverflow - you can use the Carousel in WPF.
Best wishes,
Valentin.Stoychev
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Check out the tips for optimizing your support resource searches.

Is the documentation/whitepaper for the sales dashboard demo already available? If so, where can we find it?
Thanks,
Kate

Opened SL solution gave me err
The source control provider associated with this solution could not be found. The projects will be treated as not under source control
Do you want to permanently remove the source control bindings from the projects?
compiled error:
Error 1 The type or namespace name 'SalesDashboardServiceClient' could not be found (are you missing a using directive or an assembly reference?) C:\project\sample\Telerik.SalesDashboard\Telerik.SalesDashboard.Shell\SalesDashboardServiceProxy.cs 18 17 Telerik.SalesDashboard.Shell
Any
You can safely discard the source control bindings - you do not need them on your machine.
Here is how to run the solutions:
WPF:
- open the Telerik.SalesDashboard_WPF solution
- make sure the build configuration is "Debug" and NOT "Debug XBAP"
- set the Telerik.SalesDashboard.Shell.Desktop project as the startup project
Silverlight:
- open the Telerik.SalesDashboard_SL solution
- make sure the build configuration is "Debug" and NOT "Debug XBAP"
- set the Telerik.SalesDashboard.Web project as the startup project
- set the Telerik.SalesDashboard.ShellTestPage.aspx page as the startup page
Note that you should have Telerik OpenAccess ORM installed on your machine in order to be able to build the solutions. Let me know if you have any problems with the solutions after you follow the above instructions.
Regards,
Tihomir Petkov
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Check out the tips for optimizing your support resource searches.

I am looking the the RadControl WPF version against RadControl of Silverlight build # Silverlight3_2009_2_724.
I am using 2009.2.701.35 RadControl for WPF aginst 2009.1.413.1020 Radcontrols for Silverlight 2.
As I am upgrading me code to Silverlight 3 I am looking for complitible version of RadControl for WPF.
It lead would be great help.
Propmt reply would be appiciated.
Regards,
Nikhil
It seems you are using our latest internal build for SL3 but compare it with the official version of our WPF controls. Please download the latest internal build for WPF. In order to see it in Your Account->Downloads you need to download the latest official release for WPF. Give it a try and let me know how it goes.
Best wishes,
Hristo
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Check out the tips for optimizing your support resource searches.

I am preparing a prototype/concept app for my commrades to convince them to purchase Telerik components for our use.
I have been reviewing how this application works and fiddling with it.
I have added another data component, and the corresponding classes, modules, etc.
I copied the Representatives items and renamed and configured them to be Sites (per my other data).
I have tried all sorts of things but I am getting stuck when it comes to updating and adding my bits to the Service Reference - SalesDashboardServiceReference - I think I need to add the GetRepresentativesCompletedEventArgs but can't find where or how.
Where do I do this sort of activity?
The GetRepresentativesCompletedEventArgs type is automatically generated for you by Visual Studio when you add the service reference to the Silverlight project. This means that if you make any changes to the WCF service on the server side, you need to update the service reference in the Silverlight project in order to get the changes to the service on the client side. You can update the serivce reference by right-clicking on it in the Silverlight project and choosing "Update Service Reference" from the context menu that pops up.
Let me know if this helps.
Greetings,
Tihomir Petkov
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Watch a video on how to optimize your support resource searches and check out more tips on the blogs.

Whether you make a dedicated Sites module or you intergrate the data in the Representatives module depends entirely on your project requirements. However, what you do with your data on the client side, does not affect the data types exposed by the service proxy - they are determined by the WCF service on the server. Thus, if you want to alter the types exposed by the service, you should do that on the server side and the changes will be available on the client side after you update the service reference (which will re-generate the service proxy).
All the best,
Tihomir Petkov
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Watch a video on how to optimize your support resource searches and check out more tips on the blogs.


The WCF service is included in the solution - you can find it in the web project. Regarding your second question, you may use a duplex WCF service. Here are some links that may be useful if you are not familiar with this type of services:
http://blog.developers.ba/post/2009/02/25/Silverlight-chat-application-using-WCF-full-duplex.aspx
http://silverlight.net/forums/p/121442/274009.aspx
http://www.mokosh.co.uk/post/Silverlight-3-and-WCF-Duplex-Services.aspx
http://silverlightforbusiness.net/2009/06/23/pushing-data-from-the-server-to-silverlight-3-using-a-duplex-wcf-service/
However, using a duplex service would require a number of modifications to the client code, including re-writing the service proxy.
Greetings,
Tihomir Petkov
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Watch a video on how to optimize your support resource searches and check out more tips on the blogs.

For some reason, I am unable to debug the source code. "No symbols has been loaded". I have tried deleting the "obj" folder with no luck.
Is there a resolution for this? I am running in Debug mode the SL version using VS 2008.
Thank you,
Regards
The reason for the error you get is that the source code is distributed without the .pdb files of our controls. To resolve the problem simply copy the correct version (build # and type - trial or full) of the .pdb files to the Binaries/Telerik/[Silverlight | Desktop] folder in the solution. The .pdb files are included in the .zip when you download the controls from our website.
Let me know if you have any difficulties.
All the best,
Tihomir Petkov
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Watch a video on how to optimize your support resource searches and check out more tips on the blogs.

I downloaded the .zip file, and already have the msi and none contains the PDB files.
Where do I get them please?
Regards

Also guys, how easy it is to design and develop fancy applications using Silverlight and Prism? Maybe I am new to it, I am finding it a bit complicated to do so, any ideas here?
Thanks a lot,
Regards

If I may make a comment:
It depends on what you mean by fancy. There are limitations to what Silverlight can do. That being said, Prism is a collection of related software patterns and libraries and is not trivial to fully implement in a robust enterprise application. It does have a steep learning curve but the rewards can be great. It does require a good understanding of what Prism is trying to achieve and how you want to apply it to your situation. This means it takes research time...
As far as ideas, the best I can say is grab the Prism (Composite Application) guidance up on codeplex. Then read it thoroughly. Let it ferment in your brain, thinking how it applies to the application(s) you want to build. Then read it again, looking for patterns that apply best to achieve that.. Then read Miroslav's blog post, download his source code and see how one might use the radDocking control to implement Prism. Ask yourself what parts of Prism his example implements.
At that point, you'll have a better understanding of Prism as it applies to Telerik's controls. Then it's up to you to design your application and implement the parts of Prism you need.
Regards,
Paul from Minneapolis

Thanks for your feedback. I truly appreciate it.
Actually, I started like 3 months ago reading on Silverlight. I read around 4 or 5 books. I also worked on some of the Telerik's control. I even implemented a pluggable solution in Silverlight named it "VBC shortcuts". Where I load links to downloadable XAP files. Each XAP downloaded is a separate application by itself all hosted under the umbrella of one main host application.
Now I am planning to learn Prism by convering this application to be modular and based on Prism.
I read the guidance once, for sure I have better understanding on how Prism works. I also went through the Telerik's Sales Dashboard, checked out how things are done.
I printed the Prism dashboard again and will go through it as a second read I am sure I will conclude things easily.
But maybe the few resources on Prism, examples and stuff is making it hard to fully understand it and what can be done using it.
Thanks again,
Regards

Unable to create instance of driver class 'Telerik.OpenAccess.RT.Adonet2Generic.Impl.DBDriver': System.Exception: Der Typeninitialisierer für "Telerik.OpenAccess.RT.Adonet2Generic.Impl.DBDriver" hat eine Ausnahme verursacht. ---> System.TypeInitializationException: Der Typeninitialisierer für "Telerik.OpenAccess.RT.Adonet2Generic.Impl.DBDriver" hat eine Ausnahme verursacht. ---> System.IO.FileLoadException: Die Datei oder Assembly "Telerik.OpenAccess, Version=2009.1.405.1, Culture=neutral, PublicKeyToken=7ce17eeaf1d59342" oder eine Abhängigkeit davon wurde nicht gefunden. Die gefundene Manifestdefinition der Assembly stimmt nicht mit dem Assemblyverweis überein. (Ausnahme von HRESULT: 0x80131040)
Dateiname: "Telerik.OpenAccess, Version=2009.1.405.1, Culture=neutral, PublicKeyToken=7ce17eeaf1d59342"
bei Telerik.OpenAccess.RT.ClassHelper.FromType(Type type)
bei Telerik.OpenAccess.RT.ClassHelper.FromClass(Type cls)
bei Telerik.OpenAccess.RT.sql.DriverManager.registerDriver(Driver driver)
bei Telerik.OpenAccess.RT.Adonet2Generic.Impl.DBDriver.Initialize()
bei Telerik.OpenAccess.RT.Adonet2Generic.Impl.DBDriver..cctor()
Thanks
Heinz
@Heinz: The version of the application that you can currently download was targeting the Silvelright 2 platform. For our upcoming Q3 release, which is due in the beginning of November, we will update the application to the latest version of our controls and Silverlight 3. The most probable cause for the error you get is that you are using a version of the OpenAccess ORM that is different than the one used originally in the solution.
@Bilal: I agree that Prism has a bit of a steep learning curve and using it requires proper research and some experience. We have provided several examples, but if the Microsoft guys, who are the authors after all, do not provide more samples and learning materials, Prism will remain somewhat obscure and it will not be able to enter the mainstream.
Regarding your question about the .pdb files, they were actually not included in the last several builds we released. However, we will include them in the Q3 build, so that it is easier for clients to debug their applications.
Best wishes,
Tihomir Petkov
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Watch a video on how to optimize your support resource searches and check out more tips on the blogs.

thanks,
Kerrigan.

I got a reply from Telerik. Apparently it's no longer on the Q3 release (presumably why I couldn't find the link). You have to try to download older Q2 version and you'll see the link to download the sales demo source code.
Kerrigan.
In order to download the source code of the Telerik Sales Dashboard Demo, please follow the steps below:
1. Go to Telerik.com and log-in.
2. Go to the ‘Free Trials’ section and select ‘Older Versions’ for the Silverlight product line.
3. Select ‘2009.2 812’ and then select ‘Telerik Sales Dashboard Demo’.

We are currently working on updating the demo. We will upload the new source code shortly - in two weeks at the latest.
Kind regards,
Nick
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Watch a video on how to optimize your support resource searches and check out more tips on the blogs.

Will there be an update to the code this week?
Tony
The updated source code is already updated and you can download it from your client account.
Sincerely yours,
Tihomir Petkov
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Watch a video on how to optimize your support resource searches and check out more tips on the blogs.


Having used an intelligent way of dealing with data transfer objects by implementing interfaces at the client-side, What if there is a need to edit/update records at the client side and provide validation also.
Is there an idea on how would this be added to the Telerik Dashboard?
Regards
@Tairin: I think that the information/directions from the forum threads linked below will help you address the error you receive when using OpenAccess as part of the ASP.NET AJAX Sales Dashboard application:
http://www.telerik.com/community/forums/orm/orm-express/telerik-openaccess-orm-no-enhanced-assembly-has-been-found-for-meta-data-construction.aspx
http://www.telerik.com/community/forums/orm/general-discussions/orm-example-errors.aspx
@Bilal: I believe the best approach to this will be to use the RIA Services validation mechanism. Ofcourse this will be a quite a new approach compared to the one used right now in the Sales Dashboard.
Best regards,
Valentin.Stoychev
the Telerik team
Instantly find answers to your questions on the new Telerik Support Portal.
Watch a video on how to optimize your support resource searches and check out more tips on the blogs.

Initially the model in your project matches the schema on your database. If you however have to make some changes in the database schema you will have to merge the changes with your model. This is done by using the merge functionality of Telerik OpenAccess ORM. Basically what you need to do is go in the reverse mapping wizard and click the button merge located at the top left corner of the wizard. This will open the merge window.
Best regards,
Petar
the Telerik team

Does Telerik has something to offer on the similar lines?
Thanks,
Praveen Verma
Unfortunately, our chart controls do not offer this functionality at present.
All the best,
Vladimir Milev
the Telerik team
Do you want to have your say when we set our development plans? Do you want to know when a feature you care about is added or when a bug fixed? Explore the Telerik Public Issue Tracking system and vote to affect the priority of the items.

Can please someone point me where I can find the source code for the dashboard please?
I am not able to find in my accounts, in download section.
Thanks

Why is the demo not on the latest download page but can only be found listed for last year version?
We will update the SalesDashboard to the latest version of the controls and OpenAccess by the end of the week.
Kind regards,
Tihomir Petkov
the Telerik team
Do you want to have your say when we set our development plans? Do you want to know when a feature you care about is added or when a bug fixed? Explore the Telerik Public Issue Tracking system and vote to affect the priority of the items.

Has this update been done as yet?
Everytime I do a build on the demo project, I get the following error:
rror 15 Unknown server tag 'telerik:OpenAccessDataSource'. C:\Temp\SalesDashboardSource\Telerik.SalesDashboard.Web\Views\Orders.ascx 84
Update the reference Telrik.OpenAccess to the latest build. Removed the previous reference from the web.config and it still breaks.
Any Ideas?
The demo will be updated by the end of this week (March 26th). You can try downloading the sample on Friday. Let us know if any other issues arise.
All the best,
Yavor
the Telerik team
Do you want to have your say when we set our development plans? Do you want to know when a feature you care about is added or when a bug fixed? Explore the Telerik Public Issue Tracking system and vote to affect the priority of the items.

Thanks,
You can find the Silverlight Sales Dashboard demo here.
Kind regards,
Hristo
the Telerik team
Do you want to have your say when we set our development plans? Do you want to know when a feature you care about is added or when a bug fixed? Explore the Telerik Public Issue Tracking system and vote to affect the priority of the items.

I downloaded the ASP.NET AJAX Sales Dashboard Application yesterday and installed it in my computer.
However, I'm getting the error below when I try running it. The app's already ORM- enhanced and I've copied the 2010.1.310.2 version of the OpenAccess.dll on the projects bin folder. Could you help me resolve the problem?
Thanks
Neil
Error 115 OpenAccess Error: Version mismatch: The assembly Telerik.SalesDashboard.Data, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null references the Telerik.OpenAccess runtime 2010.1.310.2. The Telerik.OpenAccess enhancer version is 2010.1.312.2. Please rebuild the assembly or use theTelerik.OpenAccess enhancer version 2010.1.310.2 C:\Users\Administrator\Documents\Telerik.SalesDashboard\Telerik.SalesDashboard.Data\obj\Debug XBAP\Telerik.SalesDashboard.Data.dll -1


I followed what you suggested and that solved the problem above. However, 6 related errors came up, see one message below.
Error 14 The type 'Telerik.OpenAccess.Util.IObjectScopeProvider' exists in both 'c:\Users\Administrator\AppData\Local\Temp\Temporary ASP.NET Files\telerik.salesdashboard.web\b3c3213b\cb99a34b\assembly\dl3\c5ec0e19\00bfd738_8fc0ca01\Telerik.OpenAccess.DLL' and 'c:\Windows\assembly\GAC_MSIL\Telerik.OpenAccess\2010.1.312.2__7ce17eeaf1d59342\Telerik.OpenAccess.dll' C:\Users\Administrator\Documents\Telerik.SalesDashboard\Telerik.SalesDashboard.Web\App_Code\SalesDashboardScopeProvider.cs 28 45 C:\...\Telerik.SalesDashboard.Web\
From the error description, I assume that you are referencing the Telerik.OpenAccess dll from your GAC, however in the web site Bin folder there is another Telerik.OpenAccess dll. Can you delete this in the Bin folder and see if the error persists?
Regards,
Iana
the Telerik team
Do you want to have your say when we set our development plans? Do you want to know when a feature you care about is added or when a bug fixed? Explore the Telerik Public Issue Tracking system and vote to affect the priority of the items.

"Could not load file or assembly 'Telerik.OpenAccess, Version=2010.1.310.2, Culture=neutral, PublicKeyToken=7ce17eeaf1d59342' or one of its dependencies. The system cannot find the file specified."
The debugger flagged the error inside Default.aspx.cs especfically the line in bold below.
protected
void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
EmployeesListView.Rebind();
Could you please check if adding the Telerik OpenAccess dlls available in the sample source References/Telerik OpenAccess folder to the web site Bin folder and see if the problem persist?
Also check if the references to the Telerik OpenAccess dlls in the Telerik.SalesDashboard.Data project point to the dlls in the References/Telerik OpenAccess.
Additionally, you can try installing Telerik OpenAccess Q1 2010.
Regards,
Iana
the Telerik team
Do you want to have your say when we set our development plans? Do you want to know when a feature you care about is added or when a bug fixed? Explore the Telerik Public Issue Tracking system and vote to affect the priority of the items.

"Error 15 OpenAccess Error: Version mismatch: The assembly Telerik.SalesDashboard.Data, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null references the Telerik.OpenAccess runtime 2010.1.310.2. The Telerik.OpenAccess enhancer version is 2010.1.312.2. Please rebuild the assembly or use theTelerik.OpenAccess enhancer version 2010.1.310.2 C:\Users\Public\Documents\Telerik.SalesDashboard\Telerik.SalesDashboard.Data\obj\Debug XBAP\Telerik.SalesDashboard.Data.dll -1 "
Could you point me where I could get 2010.1.310.2? The trial Open Access available is version 2010.1.312.2.
To download the desired version of Telerik Open Access, login to your Telerik Account, go to the Free Trials page. Then scroll to the Telerik Open Access ORM section and click on the Older versions link on the right. There you should be able to find the 2010.1 310 version.
Regards,
Iana
the Telerik team
Do you want to have your say when we set our development plans? Do you want to know when a feature you care about is added or when a bug fixed? Explore the Telerik Public Issue Tracking system and vote to affect the priority of the items.

I downloaded the demo today and have installed the 2010 version of OpenAccess, I have deleted the references to the OpenAccess in the project and added the references back.
I am still getting this error
Error 14 Unknown server tag 'telerik:OpenAccessDataSource'.
Any thoughts on what I need to do.
thanks,
Julie
If you are talking about the Silverlight version of the Sales Dashboard the Q1.2010 compatible source code will be available later this week for download.
Sincerely yours,
Valentin.Stoychev
the Telerik team
Do you want to have your say when we set our development plans? Do you want to know when a feature you care about is added or when a bug fixed? Explore the Telerik Public Issue Tracking system and vote to affect the priority of the items.

Can we download the Silverlight version of the Sales Dashboard the Q1.2010 compatible source code Now? Specifically, I am looking for the source code for SL4 and VS2010.
Thanks,
Kevin
Please accept my apology for the delayed responce.
I attached the SalesDashboard project you requested. Please take a look at it and let me know if you need more info.
Kind regards,
Ivan
the Telerik team
Do you want to have your say when we set our development plans? Do you want to know when a feature you care about is added or when a bug fixed? Explore the Telerik Public Issue Tracking system and vote to affect the priority of the items.

Actually, there should not be any VB solution within the source code of the application. We only provide C# source code. If you want to convert certain parts of the app to VB you can use our online cnverter at:
http://converter.telerik.com
Also, could you please provide some more details on the exact scenario at your side? it is possible that we are missing something and we apologize for that in advance. A short screen-play on what's happening on your side would be really helpful.
Best wishes,
Nick
the Telerik team
Do you want to have your say when we set our development plans? Do you want to know when a feature you care about is added or when a bug fixed? Explore the Telerik Public Issue Tracking system and vote to affect the priority of the items.

Regards
cwk
We have not uploaded the updated version of the Sales Dashboard. We will migrate it to Q3 2010 assemblies and upload it once ready.
Stay tuned
Best wishes,
Veselin Vasilev
the Telerik team
Do you want to have your say when we set our development plans? Do you want to know when a feature you care about is added or when a bug fixed? Explore the Telerik Public Issue Tracking system and vote to affect the priority of the items.

Hi Telrik,
When i follow this Login -> Account -> Download Products -> Rad controls for silverlight
then i got the link to download Telerik Sales Dashboard Demo (zip file) and when i click to download it redirects me to this page,
so how can i download it ?
Attention!!!
The file "Telerik.SalesDashboard_2010_3_1110_TRIAL.zip" has been blocked. The file is larger than the configured file size limit.
URL = http://telerik.s3.amazonaws.com/Telerik.SalesDashboard_2010_3_1110_TRIAL.zip?AWSAccessKeyId=06YVF22W1MPX3WNNE602&Expires=1290562772&Signature=6GBPlpp3BqftdADul9iO1LGx5uI%3d
Probably you have some firewall which is blocking the file. I was able to successfully start the download from Your account. Please check that with the system administrators.
Greetings,
Veselin Vasilev
the Telerik team

I m using the Sales Dashborad to incoporate my Project....i m using my own WCF service...have function
public List<string> GetRegions()
{
List<string> result = new List<string>();
result.Add(
"InProcess");
result.Add(
"Completed");
return result;
}
i m calling this function to proxy class...but it throws an exception...The remote server returned an error: NotFound
Please chk where m going to worng...assist me in this regard