Problems with Internal build as of Aug 16

10 posts, 1 answers
  1. miksh
    miksh avatar
    275 posts
    Member since:
    Nov 2006

    Posted 18 Aug 2011 Link to this post

    When downloading from VS2010 JustCode-Check for new version:
    - for two days an incomplete version was downloaded (9Mb instead of 17Mb)
    - now it was downloaded and installed fine but tells that the version exired

    Please double check.
  2. Vladi
    Admin
    Vladi avatar
    167 posts

    Posted 29 Aug 2011 Link to this post

    Hello Miksh,

    Thank you for your feedback. I'm sorry for the late reply. We investigated the issue. I guess you are aware that JustCode trial period is 60 days. It seems that your trial period has expired. There are two options - either you go on and buy it (then you won't have troubles with the expiration, also you will have support, and if you choose it - major versions update), or you can request additional trial period if this hasn't been enough. Please let me know what you will choose.

    Best wishes,
    Vladi
    the Telerik team

    Thank you for being the most amazing .NET community! Your unfailing support is what helps us charge forward! We'd appreciate your vote for Telerik in this year's DevProConnections Awards. We are competing in mind-blowing 20 categories and every vote counts! VOTE for Telerik NOW >>

  3. DevCraft banner
  4. miksh
    miksh avatar
    275 posts
    Member since:
    Nov 2006

    Posted 29 Aug 2011 Link to this post

    We already have the subrcription and from time to time I use an internal build to eveluate the new version. You are right, in the beginning of this year some internal build expired but after that I was able to succesfully install several final & internal versions until this one. Now I have to rollback to July's release which seems to be very buggy, frozes VS very often and fails to provide referencial navigation.

    Anyway, being your subscriber is there a way to evaluate the internal builds even if an previous internal biuld has expired?
  5. Vladi
    Admin
    Vladi avatar
    167 posts

    Posted 29 Aug 2011 Link to this post

    Hello Miksh,

    Thanks for the follow-up. You can download new internal builds with your active subscription (doesn't matter whether it is trial or development license) and then revert to an older one by uninstalling the new and installing again the old. We offer these internal builds to all our clients. Unfortunately the trial users are limited only to 60 days. And a small note - this trial period is for the whole use of JustCode, not only for one version or internal build. Please let me know if I understand you correctly or you need further help.

    Greetings,
    Vladi
    the Telerik team

    Thank you for being the most amazing .NET community! Your unfailing support is what helps us charge forward! We'd appreciate your vote for Telerik in this year's DevProConnections Awards. We are competing in mind-blowing 20 categories and every vote counts! VOTE for Telerik NOW >>

  6. miksh
    miksh avatar
    275 posts
    Member since:
    Nov 2006

    Posted 29 Aug 2011 Link to this post

    • No problem to download both trial, internal build, and developer licence build from both Telerik website and VS2010 after checking for a new verison
    • No problem to install/uninstall a developer licence build
    • No problem to install/uninstall an internal build
    • WAS no problem to use any internal biuld before Aug 16 one
    • Once the Aug 16 internal biuld is succesfully installed it reports that JustCode expired.

    If this is an issue in this internal build then I'm fine to wait a little.
    If this would prevent me, as a your subscriber, from evaluating ANY of further internal builds then it is quite sad.

  7. Answer
    Vladi
    Admin
    Vladi avatar
    167 posts

    Posted 30 Aug 2011 Link to this post

    Hello Miksh,

    Thanks again for following up. Could you please try and tell me whether you have the same problems running the internal build from Aug 16 with your other account - the one that has development license?

    Kind regards,
    Vladi
    the Telerik team

    Thank you for being the most amazing .NET community! Your unfailing support is what helps us charge forward! We'd appreciate your vote for Telerik in this year's DevProConnections Awards. We are competing in mind-blowing 20 categories and every vote counts! VOTE for Telerik NOW >>

  8. miksh
    miksh avatar
    275 posts
    Member since:
    Nov 2006

    Posted 30 Aug 2011 Link to this post

    The Aug 16 internal build taken from the dev licence account works! Thanks a lot.

    To clarify: what version is suggested by VS2010 then while checking for a new internal build? Usually I used this one but should download from the account now.
  9. Vladi
    Admin
    Vladi avatar
    167 posts

    Posted 31 Aug 2011 Link to this post

    Hello Miksh,

    That's great news! VS 2010 JC add-in should suggest you the latest available internal build if you have checked the check-box "Include internal build when checking for updates" and you haven't install it yet. Actually we have just published new internal build (yesterday, Aug 30) and you should have received notification about it through VS 2010. Please let me know if you have.

    Greetings,
    Vladi
    the Telerik team

    Thank you for being the most amazing .NET community! Your unfailing support is what helps us charge forward! We'd appreciate your vote for Telerik in this year's DevProConnections Awards. We are competing in mind-blowing 20 categories and every vote counts! VOTE for Telerik NOW >>

  10. miksh
    miksh avatar
    275 posts
    Member since:
    Nov 2006

    Posted 31 Aug 2011 Link to this post

    Thanks. Btw, Visual Studio seems to download not a complete file - when I run the msi installer it tells that it's corrupted.
    File size downloaded by VS - 28,835,840 bytes
    File size downloaded from my account - 30,551,552 bytes.
    I leave it to you to investigate/fix.
  11. Vladi
    Admin
    Vladi avatar
    167 posts

    Posted 31 Aug 2011 Link to this post

    Hello Miksh,

    Thanks for the follow-up. We'll investigate. Hope you won't have such troubles in the future.

    Kind regards,
    Vladi
    the Telerik team

    Thank you for being the most amazing .NET community! Your unfailing support is what helps us charge forward! We'd appreciate your vote for Telerik in this year's DevProConnections Awards. We are competing in mind-blowing 20 categories and every vote counts! VOTE for Telerik NOW >>

Back to Top
DevCraft banner