<?xml version="1.0"?>
<doc>
    <assembly>
        <name>RadInput.Net2</name>
    </assembly>
    <members>
        <member name="T:Telerik.WebControls.DateFormatParser">
            <summary>
            Summary description for DateFormatParser.
            </summary>
        </member>
        <member name="T:Telerik.WebControls.DateRangeValidation">
            <summary>
            DateInputRangeValidation describes the method used when enforcing that the
            selected date is within the MinDate-MaxDate bounds.
            </summary>
        </member>
        <member name="F:Telerik.WebControls.DateRangeValidation.Immediate">
            <summary>
            The constraints are applied immediately. The control will not allow the user to
            enter a date that is outside the preset range.
            </summary>
        </member>
        <member name="F:Telerik.WebControls.DateRangeValidation.OnBlur">
            <summary>
            The constraints are applied when the control loses focus. It will be possible to
            enter a date outside the range, but it will be truncated later.
            </summary>
        </member>
        <member name="T:Telerik.WebControls.RadDateInput">
            <summary>
            A control which ensures the date entered by the user is verified and
            accurate.
            </summary>
            <example>
                The following example demonstrates how to dynamically add
                <see cref="T:Telerik.WebControls.RadDateInput">RadDateInput</see> to the page. 
                <code lang="CS">
            private void Page_Load(object sender, System.EventArgs e) 
            { 
                RadDateInput dateInput = new RadDateInput();
                dateInput.ID = "dateInput";
                dateInput.Format = "d"; //Short date format
                dateInput.Culture = new CultureInfo("en-US");
                dateInput.SelectedDate = DateTime.Now;
                
                DateInputPlaceholder.Controls.Add(dateInput);
            }
                </code>
            	<code lang="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                Dim dateInput As New RadDateInput()
                dateInput.ID = "dateInput"
                dateInput.Format = "d" 'Short Date Format
                dateInput.Culture = New CultureInfo("en-US")
                dateInput.SelectedDate = DateTime.Now
                
                DateInputPlaceholder.Controls.Add(dateInput)
            End Sub
                </code>
            </example>
            <remarks>
                You need to set the <see cref="P:Telerik.WebControls.RadDateInput.DateFormat">DateFormat Property</see> to specify the
                relevant format for the date. You can also specify the culture information by
                setting the <see cref="P:Telerik.WebControls.RadDateInput.Culture">Culture Property</see>.
            </remarks>
        </member>
        <member name="P:Telerik.RadInputUtils.RadControl.Version">
            <summary>Gets the component's current version.</summary>
        </member>
        <member name="P:Telerik.RadInputUtils.RadControl.UseEmbeddedScripts">
            <summary>
            Gets or sets a value indicating whether to use the embedded JavaScript files or not.
            </summary>
            <value>
            	<strong>True</strong> if embedded JavaScript files are to be used; otherwise
            <strong>false</strong>. The default value is <strong>true</strong>.
            </value>
            <remarks>
            Use this property for debugging purposes or to apply any modifications to the
            JavaScript files.
            </remarks>
        </member>
        <member name="M:Telerik.WebControls.RadInputControl.Focus">
            <summary>Sets input focus to a RadInput.</summary>
            <remarks>
            	<para>Use the Focus method to set the initial focus of the Web page to the
                RadInput. The page will be opened in the browser with the control
                selected.</para>
            	<para>The Focus method causes a call to the page focus script to be emitted on the
                rendered page. If the page does not contain a control with an HTML ID attribute
                that matches the control that the Focus method was invoked on, then page focus will
                not be set. An example where this can occur is when you set the focus on a user
                control instead of setting the focus on a child control of the user control. In
                this scenario, you can use the FindControl method to find the child control of the
                user control and invoke its Focus method.</para>
            </remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="E:Telerik.WebControls.RadInputControl.ChildrenCreated">
            <summary>
            	Occurs after all child controls of the RadDateInput control have been created.
            	You can customize the control there, and add additional child controls.
            </summary>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.Label">
            <summary>
            Gets or sets the text of the <label>tag rendered along with RadInput
            control.</label>
            </summary>
            <value>
            A string used as a label for the control. The default value is empty string
            ("").
            </value>
            <remarks>
            If the value of this property has not been set, a tag will not be rendered. Keep
            in mind that accessibility standards require labels for all input controls.
            </remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
            <example>
            	<para>The following code example demonstrates how to use the Label property:</para>
            	<pre>
            &lt;/%@ Page Language="C#" AutoEventWireup="True" /%&gt;  <br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;  <br/>
            
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>
            &lt;head&gt;<br/>
                &lt;title&gt;RadTextBox Example &lt;/title&gt;<br/>
            		<br/>    &lt;script runat="server"&gt;<br/>
            		<br/>
            		<br/>        protected void RadTextBox1_TextChanged(object sender, EventArgs e)<br/>
                    {<br/>            this.RadTextBox1.Label = this.RadTextBox1.Text;<br/>        }<br/>&lt;/script&gt;<br/>
            		<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>
                        RadTextBox Example<br/>        &lt;/h3&gt;<br/>
                    &lt;rad:RadTextBox ID="RadTextBox1" AutoPostBack="true" EmptyMessage="Type Here" Label="Default Label: " runat="server" OnTextChanged="RadTextBox1_TextChanged"&gt;<br/>
                    &lt;/rad:RadTextBox&gt;<br/>
            		<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            </example>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.LabelCssClass">
            <summary>
            Gets or sets the CSS class applied to the tag rendered along with RadInput
            control.
            </summary>
            <value>
            A string used specifying the CSS class of the label of the control. The default
            value is empty string ("").
            </value>
            <remarks><para>This property is applicable only if the Label property has been set.</para></remarks>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.AutoPostBack">
            <summary>
            Gets or sets a value indicating whether an automatic post back to the server
            occurs whenever the user presses the ENTER or the TAB key while in the RadInput
            control.
            </summary>
            <remarks>
            Use the AutoPostBack property to specify whether an automatic post back to the
            server will occur whenever the user presses the ENTER or the TAB key while in the
            RadInput control.
            </remarks>
            <value>
            true if an automatic postback occurs whenever the user presses the ENTER or the
            TAB key while in the RadInput control; otherwise, false. The default is
            false.
            </value>
            <example>
            	<para>The following code example demonstrates how to use the AutoPostBack property
                to automatically display the sum of the values entered in the RadTextBoxes when the
                user presses the ENTER or the TAB key.</para>
            	<para>[C#]</para>
            	<pre>
            &lt;/%@ Page Language="C#" AutoEventWireup="True" /%&gt;  <br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;  <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>
                "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>    &lt;title&gt;RadTextBox Example &lt;/title&gt;<br/>
            		<br/>    &lt;script runat="server"&gt;<br/>
            		<br/>      protected void Page_Load(Object sender, EventArgs e)<br/>      {<br/>         int Answer;<br/>
            		<br/>         // Due to a timing issue with when page validation occurs, call the<br/>
                     // Validate method to ensure that the values on the page are valid.<br/>         Page.Validate();<br/>
            		<br/>         // Add the values in the text boxes if the page is valid.<br/>         if(Page.IsValid)<br/>         {<br/>            Answer = Convert.ToInt32(Value1.Text) + Convert.ToInt32(Value2.Text);<br/>
            		<br/>            AnswerMessage.Text = Answer.ToString();<br/>         }<br/>
            		<br/>      }<br/>    &lt;/script&gt;<br/>
            		<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>            RadTextBox Example<br/>
                    &lt;/h3&gt;<br/>        &lt;table&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/>                    Enter integer values into the text boxes.<br/>
                                &lt;br /&gt;<br/>                    The two values are automatically added<br/>                    &lt;br /&gt;<br/>                    when you tab out of the text boxes.<br/>
                                &lt;br /&gt;<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/>
            		<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr align="center"&gt;<br/>                &lt;td&gt;<br/>
                                &lt;rad:RadTextBox ID="Value1" Columns="2" MaxLength="3" AutoPostBack="True" Text="1" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>
                                +<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    &lt;rad:RadTextBox ID="Value2" Columns="2" MaxLength="3" AutoPostBack="True" Text="1" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    =<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    &lt;asp:Label ID="AnswerMessage" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="2"&gt;<br/>
                                &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Value1"<br/>                        ErrorMessage="Please enter a value.&lt;br /&gt;" EnableClientScript="False" Display="Dynamic"<br/>
                                    runat="server" /&gt;<br/>                    &lt;asp:RangeValidator ID="Value1RangeValidator" ControlToValidate="Value1" Type="Integer"<br/>
                                    MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    EnableClientScript="False" Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>
                            &lt;td colspan="2"&gt;<br/>                    &lt;asp:RequiredFieldValidator ID="Value2RequiredValidator" ControlToValidate="Value2"<br/>
                                    ErrorMessage="Please enter a value.&lt;br /&gt;" EnableClientScript="False" Display="Dynamic"<br/>                        runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value2RangeValidator" ControlToValidate="Value2" Type="Integer"<br/>                        MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    EnableClientScript="False" Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    &amp;nbsp<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>        &lt;/table&gt;<br/>
                &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;<br/>
            	</pre>
            	<para>[Visual Basic]</para>
            	<pre>
            &lt;/%@ Page Language="VB" AutoEventWireup="True" /%&gt;<br/><br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/><br/>&lt;!DOCTYPE html Public "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>
                "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>    &lt;title&gt;RadTextBox Example &lt;/title&gt;<br/><br/>    &lt;script runat="server"&gt;<br/><br/>
                  Protected Sub Page_Load(sender As Object, e As EventArgs)<br/><br/>         Dim Answer As Integer<br/><br/>         ' Due to a timing issue with when page validation occurs, call the<br/>         ' Validate method to ensure that the values on the page are valid.<br/>
                     Page.Validate()<br/><br/>         ' Add the values in the text boxes if the page is valid.<br/>         If Page.IsValid Then<br/><br/>            Answer = Convert.ToInt32(Value1.Text) + Convert.ToInt32(Value2.Text)<br/><br/>
                        AnswerMessage.Text = Answer.ToString()<br/><br/>         End If<br/><br/>      End Sub<br/>    &lt;/script&gt;<br/><br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>
                        RadTextBox Example<br/>        &lt;/h3&gt;<br/>        &lt;table&gt;<br/>            &lt;tr&gt;<br/>
                            &lt;td colspan="5"&gt;<br/>                    Enter Integer values into the text boxes.<br/>
                                &lt;br /&gt;<br/>                    The two values are automatically added<br/>
                                &lt;br /&gt;<br/>                    When you tab out of the text boxes.<br/>
                                &lt;br /&gt;<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>
                        &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/><br/>                &lt;/td&gt;<br/>
                        &lt;/tr&gt;<br/>            &lt;tr align="center"&gt;<br/>                &lt;td&gt;<br/>
                                &lt;rad:RadTextBox ID="Value1" Columns="2" MaxLength="3" AutoPostBack="True" Text="1" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    +<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>
                                &lt;rad:RadTextBox ID="Value2" Columns="2" MaxLength="3" AutoPostBack="True" Text="1" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    =<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    &lt;asp:Label ID="AnswerMessage" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="2"&gt;<br/>
                                &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Value1"<br/>
                                    ErrorMessage="Please enter a value.&lt;br /&gt;" EnableClientScript="False" Display="Dynamic"<br/>
                                    runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value1RangeValidator" ControlToValidate="Value1" Type="Integer"<br/>
                                    MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    EnableClientScript="False" Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>
                            &lt;td colspan="2"&gt;<br/>
                                &lt;asp:RequiredFieldValidator ID="Value2RequiredValidator" ControlToValidate="Value2"<br/>
                                    ErrorMessage="Please enter a value.&lt;br /&gt;" EnableClientScript="False" Display="Dynamic"<br/>
                                    runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value2RangeValidator" ControlToValidate="Value2" Type="Integer"<br/>
                                    MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    EnableClientScript="False" Display="Dynamic" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    &amp;nbsp<br/>                &lt;/td&gt;<br/>
                        &lt;/tr&gt;<br/>        &lt;/table&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.CausesValidation">
            <summary>
            Gets or sets a value indicating whether validation is performed when the
            RadInput control is set to validate when a postback occurs.
            </summary>
            <value>
            true if validation is performed when the RadInput control is set to validate
            when a postback occurs; otherwise, false. The default value is false.
            </value>
            <remarks>
            	<para>Use the CausesValidation property to determine whether validation is
                performed on both the client and the server when a RadInput control is set to
                validate when a postback occurs. Page validation determines whether the input
                controls associated with a validation control on the page all pass the validation
                rules specified by the validation control.</para>
            	<para>By default, a RadInput control does not cause page validation when the
                control loses focus. To set the RadInput control to validate when a postback
                occurs, set the CausesValidation property to true and the AutoPostBack property to
                true.</para>
            	<para>When the value of the CausesValidation property is set to true, you can also
                use the ValidationGroup property to specify the name of the validation group for
                which the RadInput control causes validation.</para>
            	<para>This property cannot be set by themes or style sheet themes.</para>
            </remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.MaxLength">
            <summary>Gets or sets the maximum number of characters allowed in the text box.</summary>
            <value>
            The maximum number of characters allowed in the text box. The default is 0, which
            indicates that the property is not set.
            </value>
            <remarks>
            Use the MaxLength property to limit the number of characters that can be entered
            in the RadInput control. This property cannot be set by themes or style sheet
            themes. For more information, see ThemeableAttribute and Introduction to ASP.NET
            Themes.
            </remarks>
            <example>
            	<para>The following code example demonstrates how to use the MaxLength property to
                limit the number of characters allowed in the RadTextBox control to 3. This example
                has a RadTextBox that accepts user input, which is a potential security threat. By
                default, ASP.NET Web pages validate that user input does not include script or HTML
                elements.</para>
            	<para>[C#]</para>
            	<pre>
            &lt;/%@ Page Language="C#" AutoEventWireup="True" /%&gt;  <br/>
            &lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;  <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>
                "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>
                &lt;title&gt;RadTextBox Example &lt;/title&gt;<br/>
            		<br/>    &lt;script runat="server"&gt;<br/>
            		<br/>        protected void AddButton_Click(Object sender, EventArgs e)<br/>        {<br/>
                        int Answer;<br/>
            		<br/>            Answer = Convert.ToInt32(Value1.Text) + Convert.ToInt32(Value2.Text);<br/>
            		<br/>            AnswerMessage.Text = Answer.ToString();<br/>
            		<br/>        }<br/>
            		<br/>    &lt;/script&gt;<br/>
            		<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>
                    &lt;h3&gt;<br/>            RadTextBox Example<br/>        &lt;/h3&gt;<br/>        &lt;table&gt;<br/>
                        &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/>                    Enter integer values into the text boxes.<br/>
                                &lt;br /&gt;<br/>                    Click the Add button to add the two values.<br/>
                                &lt;br /&gt;<br/>                    Click the Reset button to reset the text boxes.<br/>
                            &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/>
            
            		<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr align="center"&gt;<br/>
                            &lt;td&gt;<br/>
                                &lt;rad:RadTextBox ID="Value1" Columns="2" MaxLength="3" Text="1" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    +<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    &lt;rad:RadTextBox ID="Value2" Columns="2" MaxLength="3" Text="1" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    =<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    &lt;asp:Label ID="AnswerMessage" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>
                        &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="2"&gt;<br/>
                                &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Value1"<br/>
                                    ErrorMessage="Please enter a value.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value1RangeValidator" ControlToValidate="Value1" Type="Integer"<br/>
                                    MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td colspan="2"&gt;<br/>
                                &lt;asp:RequiredFieldValidator ID="Value2RequiredValidator" ControlToValidate="Value2"<br/>
                                    ErrorMessage="Please enter a value.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value2RangeValidator" ControlToValidate="Value2" Type="Integer"<br/>
                                    MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>
                                &amp;nbsp<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr align="center"&gt;<br/>
                            &lt;td colspan="4"&gt;<br/>                    &lt;asp:Button ID="AddButton" Text="Add" OnClick="AddButton_Click" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>
            		<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>        &lt;/table&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;<br/>
            	</pre>
            	<para>[Visual Basic]</para>
            	<pre>
            &lt;/%@ Page Language="VB" AutoEventWireup="True" /%&gt;<br/><br/>
            &lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/>
            &lt;!DOCTYPE html Public "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>
            &lt;html&gt;<br/>&lt;head&gt;<br/>    &lt;title&gt;RadTextBox Example &lt;/title&gt;<br/><br/>    &lt;script runat="server"&gt;<br/><br/>
                  Protected Sub AddButton_Click(sender As Object, e As EventArgs)<br/><br/>         Dim Answer As Integer<br/><br/>
                     Answer = Convert.ToInt32(Value1.Text) + Convert.ToInt32(Value2.Text)<br/><br/>         AnswerMessage.Text = Answer.ToString()<br/>
            <br/>      End Sub<br/><br/>    &lt;/script&gt;<br/><br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>
                    &lt;h3&gt;<br/>            RadTextBox Example<br/>        &lt;/h3&gt;<br/>        &lt;table&gt;<br/>            &lt;tr&gt;<br/>
                            &lt;td colspan="5"&gt;<br/>                    Enter Integer values into the text boxes.<br/>
                                &lt;br /&gt;<br/>                    Click the Add button To add the two values.<br/> 
                               &lt;br /&gt;<br/>                    Click the Reset button To reset the text boxes.<br/>
                            &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/><br/>
                            &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr align="center"&gt;<br/>                &lt;td&gt;<br/>
                                &lt;rad:RadTextBox ID="Value1" Columns="2" MaxLength="3" Text="1" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    +<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    &lt;rad:RadTextBox ID="Value2" Columns="2" MaxLength="3" Text="1" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    =<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    &lt;asp:Label ID="AnswerMessage" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="2"&gt;<br/>
                                &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Value1"<br/>
                                    ErrorMessage="Please enter a value.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value1RangeValidator" ControlToValidate="Value1" Type="Integer"<br/>
                                    MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>
                            &lt;td colspan="2"&gt;<br/>
                                &lt;asp:RequiredFieldValidator ID="Value2RequiredValidator" ControlToValidate="Value2"<br/>
                                    ErrorMessage="Please enter a value.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value2RangeValidator" ControlToValidate="Value2" Type="Integer"<br/>
                                    MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    &amp;nbsp<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>
                        &lt;tr align="center"&gt;<br/>                &lt;td colspan="4"&gt;<br/>
                                &lt;asp:Button ID="AddButton" Text="Add" OnClick="AddButton_Click" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/><br/>                &lt;/td&gt;<br/>
                        &lt;/tr&gt;<br/>        &lt;/table&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.ReadOnly">
            <summary>
            Gets or sets a value indicating whether the contents of the RadInput control
            can be changed.
            </summary>
            <value>
            true if the contents of the RadInput control cannot be changed; otherwise,
            false. The default value is false.
            </value>
            <remarks>
            Use the ReadOnly property to specify whether the contents of the RadInput
            control can be changed. Setting this property to true will prevent users from entering
            a value or changing the existing value. Note that the user of the RadInput control
            cannot change this property; only the developer can. The Text value of a RadInput
            control with the ReadOnly property set to true is sent to the server when a postback
            occurs, but the server does no processing for a read-only RadInput. This prevents a
            malicious user from changing a Text value that is read-only. The value of the Text
            property is preserved in the view state between postbacks unless modified by
            server-side code. This property cannot be set by themes or style sheet themes.
            </remarks>
            <example>
            	<para>The following code example demonstrates how to use the ReadOnly property to
                prevent any changes to the text displayed in the RadTextBox control. This example
                has a RadTextBox that accepts user input, which is a potential security threat. By
                default, ASP.NET Web pages validate that user input does not include script or HTML
                elements.</para>
            	<para>[C#]</para>
            	<pre>
            &lt;/%@ Page Language="C#" AutoEventWireup="True" /%&gt;  <br/>
            &lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;  <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>
                "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>
                &lt;title&gt;MultiLine TextBox Example &lt;/title&gt;<br/>
            		<br/>    &lt;script runat="server"&gt;<br/>        protected void SubmitButton_Click(Object sender, EventArgs e)<br/>
                    {<br/>
            		<br/>            Message.Text = "Thank you for your comment: &lt;br /&gt;" + Comment.Text;<br/>
            		<br/>        }<br/>
            		<br/>        protected void Check_Change(Object sender, EventArgs e)<br/>        {<br/>
            		<br/>            Comment.Wrap = WrapCheckBox.Checked;<br/>            Comment.ReadOnly = ReadOnlyCheckBox.Checked;<br/>
            		<br/>        }<br/>
            		<br/>    &lt;/script&gt;<br/>
            		<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>
                        MultiLine TextBox Example<br/>        &lt;/h3&gt;<br/>        Please enter a comment and click the submit button.<br/>
                    &lt;br /&gt;<br/>        &lt;br /&gt;<br/>
                    &lt;rad:RadTextBox ID="Comment" TextMode="MultiLine" Columns="50" Rows="5" runat="server" /&gt;<br/>
                    &lt;br /&gt;<br/>        &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Comment"<br/>
                        ErrorMessage="Please enter a comment.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                    &lt;asp:CheckBox ID="WrapCheckBox" Text="Wrap Text" Checked="True" AutoPostBack="True"<br/>
                        OnCheckedChanged="Check_Change" runat="server" /&gt;<br/>
            		<br/>        &lt;asp:CheckBox ID="ReadOnlyCheckBox" Text="ReadOnly" Checked="False" AutoPostBack="True"<br/>
                        OnCheckedChanged="Check_Change" runat="server" /&gt;<br/>
            		<br/>        &lt;asp:Button ID="SubmitButton" Text="Submit" OnClick="SubmitButton_Click" runat="server" /&gt;<br/>
                    &lt;hr /&gt;<br/>        &lt;asp:Label ID="Message" runat="server" /&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>
            &lt;/html&gt;
                </pre>
            	<para>[Visual Basic]</para>
            	<pre>
            &lt;/%@ Page Language="VB" AutoEventWireup="True" /%&gt;  <br/>
            &lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;  <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>
                "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>
                &lt;title&gt;MultiLine RadTextBox Example &lt;/title&gt;<br/>
            		<br/>    &lt;script runat="server"&gt;<br/>
            		<br/>      Protected Sub SubmitButton_Click(sender As Object, e As EventArgs )<br/>
            		<br/>         Message.Text = "Thank you for your comment: &lt;br /&gt;" + Comment.Text<br/>
            		<br/>      End Sub<br/>
            		<br/>      Protected Sub Check_Change(sender As Object, e As EventArgs )<br/>
            		<br/>         Comment.Wrap = WrapCheckBox.Checked<br/>         Comment.ReadOnly = ReadOnlyCheckBox.Checked<br/>
            		<br/>      End Sub<br/>
            		<br/>    &lt;/script&gt;<br/>
            		<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>
                        MultiLine RadTextBox Example<br/>        &lt;/h3&gt;<br/>        Please enter a comment and click the submit button.<br/>
                    &lt;br /&gt;<br/>        &lt;br /&gt;<br/>
                    &lt;rad:RadTextBox ID="Comment" TextMode="MultiLine" Columns="50" Rows="5" runat="server" /&gt;<br/>
                    &lt;br /&gt;<br/>        &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Comment"<br/>
                        ErrorMessage="Please enter a comment.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                    &lt;asp:CheckBox ID="WrapCheckBox" Text="Wrap Text" Checked="True" AutoPostBack="True"<br/>
                        OnCheckedChanged="Check_Change" runat="server" /&gt;<br/>
            		<br/>        &lt;asp:CheckBox ID="ReadOnlyCheckBox" Text="ReadOnly" Checked="False" AutoPostBack="True"<br/>
                        OnCheckedChanged="Check_Change" runat="server" /&gt;<br/>
            		<br/>        &lt;asp:Button ID="SubmitButton" Text="Submit" OnClick="SubmitButton_Click" runat="server" /&gt;<br/>
                    &lt;hr /&gt;<br/>        &lt;asp:Label ID="Message" runat="server" /&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>
            &lt;/html&gt;
                </pre>
            </example>
            <notes>
            This example has a text box that accepts user input, which is a potential
            security threat. By default, ASP.NET Web pages validate that user input does not
            include script or HTML elements.
            </notes>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.EmptyMessage">
            <summary>Gets or sets a value message shown when the control is empty.</summary>
            <value>
            A string specifying the empty message. The default value is empty string.
            ("").
            </value>
            <remarks>
            Shown when the control is empty and loses focus. You can set the empty message
            text through EmptyMessage property.
            </remarks>
            <example>
            	<para>The following code example demonstrates how to set an empty message in code
                behind:</para>
            	<para>[C#]</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;  <br/>
            &lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;  <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>
            		<br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt;<br/>&lt;head runat="server"&gt;<br/>
                &lt;title&gt;Untitled Page&lt;/title&gt;<br/>    &lt;script runat="server"&gt;    <br/>
                    protected void Button1_Click(object sender, EventArgs e)<br/>        {<br/>
                        RadNumericTextBox1.EmptyMessage = RadNumericTextBox1.Text;<br/>            RadNumericTextBox1.Text = String.Empty;            <br/>
                    }<br/>&lt;/script&gt;<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>
                    &lt;rad:RadTextBox EmptyMessage="Type Here" ID="RadNumericTextBox1" runat="server"&gt;<br/>
                    &lt;/rad:RadTextBox&gt;<br/>
                    &lt;asp:Button ID="Button1" runat="server" Text="Set Empty Message" OnClick="Button1_Click" /&gt;<br/>
                &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;<br/>
            	</pre>
            	<para>[Visual Basic]</para>
            	<pre>
            &lt;/%@ Page Language="VB" /%&gt;<br/>
            &lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/>
            &lt;!DOCTYPE html Public "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>
            <br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt;<br/>&lt;head id="Head1" runat="server"&gt;<br/>
                &lt;title&gt;Untitled Page&lt;/title&gt;<br/>    &lt;script runat="server"&gt;<br/>
                Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click<br/>
                        RadNumericTextBox1.EmptyMessage = RadNumericTextBox1.Text<br/>            RadNumericTextBox1.Text = String.Empty<br/>
                End Sub<br/>    &lt;/script&gt;<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>
                    &lt;rad:RadTextBox EmptyMessage="Type Here" ID="RadNumericTextBox1" runat="server"&gt;<br/>
                    &lt;/rad:RadTextBox&gt;<br/>        &lt;asp:Button ID="Button1" runat="server" Text="Set Empty Message" /&gt;<br/>
                &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.SelectionOnFocus">
            <summary>Gets or sets the selection on focus options for the RadInput control</summary>
            <value>
            	<para>A Telerik.WebControls.SelectionOnFocus object that represents the selection on
                focus in RadInput control. The default value is "None".</para>
            	<list type="bullet">
            		<item>None</item>
            		<item>CaretToBeginning</item>
            		<item>CaretToEnd</item>
            		<item>SelectAll</item>
            	</list>
            </value>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
            <remarks>
            	<para>Use this property to provide selection on focus of RadInput control. You
                can set one of the following values:</para>
            </remarks>
            <example>
            	<para>The following example demonstrates how to set the SelectionOnFocus property
                from DropDownList:</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;  <br/>
            &lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;  <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>
            		<br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt;<br/>&lt;head id="Head1" runat="server"&gt;<br/>
                &lt;title&gt;RadTextBox selection&lt;/title&gt;<br/>    &lt;script runat="server"&gt;<br/>
                protected void DropDownList1_SelectedIndexChanged(object sender, EventArgs e)<br/>    {<br/>
                    if (DropDownList1.SelectedValue == "CaretToBeginning")<br/>        {<br/>
                        this.RadTextBox1.SelectionOnFocus = Telerik.WebControls.SelectionOnFocus.CaretToBeginning;<br/>
                    }<br/>        else if (DropDownList1.SelectedValue == "CaretToEnd")<br/>        {<br/>
                        this.RadTextBox1.SelectionOnFocus = Telerik.WebControls.SelectionOnFocus.CaretToEnd;<br/>
                    }<br/>        else if (DropDownList1.SelectedValue == "SelectAll")<br/>        {<br/>
                        this.RadTextBox1.SelectionOnFocus = Telerik.WebControls.SelectionOnFocus.SelectAll;<br/>
                    }<br/>    }<br/>    &lt;/script&gt;<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>
                &lt;form id="form1" runat="server"&gt;<br/>    &lt;div&gt;<br/>
                    &lt;rad:RadTextBox SelectionOnFocus="CaretToBeginning" ID="RadTextBox1" runat="server"&gt;&lt;/rad:RadTextBox&gt;<br/>
                    &lt;br /&gt;<br/>
                    &lt;asp:DropDownList AutoPostBack="true" ID="DropDownList1" runat="server" OnSelectedIndexChanged="DropDownList1_SelectedIndexChanged"&gt;<br/>
                        &lt;asp:ListItem Text="CaretToBeginning"&gt;CaretToBeginning&lt;/asp:ListItem&gt;<br/>
                        &lt;asp:ListItem Text="CaretToEnd"&gt;CaretToEnd&lt;/asp:ListItem&gt;<br/>
                        &lt;asp:ListItem Text="SelectAll"&gt;SelectAll&lt;/asp:ListItem&gt;<br/>
                    &lt;/asp:DropDownList&gt;&lt;/div&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            </example>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.ClientEvents">
            <summary>
            Gets or sets an instance of the Telerik.WebControls.InputClientEvents class which defines 
            the JavaScript functions (client-side event handlers) that are invoked when specific client-side events are raised.
            </summary>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.ShowButton">
            <summary>
            Gets or sets a value indicating whether the button is displayed in the
            RadInput control.
            </summary>
            <value>
            true if the button is displayed; otherwise, false. The default value is true,
            however this property is only examined when the ButtonTemplate property is not a null
            reference (Nothing in Visual Basic).
            </value>
            <remarks>
            	<para>Use the ShowButton property to specify whether the button is displayed in the
                RadInput control.</para>
            	<para>The contents of the button are controlled by the ButtonTemplate
                property.</para>
            </remarks>
            <example>
            	<para>The following code example demonstrates how to use the ShowButton property to
                display the button in the RadInput control.</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;    <br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;    <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt; <br/>
            
            		<br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt; <br/>&lt;head id="Head1" runat="server"&gt; <br/>
                &lt;title&gt;Untitled Page&lt;/title&gt; <br/>
                &lt;script language="javascript" type="text/javascript"&gt; <br/>    function Click(sender) <br/>    { <br/>
                    alert("click"); <br/>    } <br/>    &lt;/script&gt; <br/>&lt;/head&gt; <br/>&lt;body&gt; <br/>
                &lt;form id="form1" runat="server"&gt; <br/>
                    &lt;rad:RadTextBox ShowButton="true" ID="RadNumericTextBox1" runat="server"&gt; <br/>
                        &lt;ClientEvents OnButtonClick="Click" /&gt; <br/>            &lt;ButtonTemplate&gt; <br/>
                            &lt;input type="button" value="click here"  /&gt; <br/>            &lt;/ButtonTemplate&gt; <br/>
                    &lt;/rad:RadTextBox&gt; <br/>    &lt;/form&gt; <br/>&lt;/body&gt; <br/>&lt;/html&gt;
                </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.ButtonsPosition">
            <summary>
            Gets or sets a value that indicates whether the button should be positioned left or right of the RadInput box.
            </summary>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.Text">
            <summary>Gets or sets the text content of the RadInput control.</summary>
            <value>
            The text displayed in the RadInput control. The default is an empty string
            ("").
            </value>
            <remarks>
            	<para>Use the Text property to specify or determine the text displayed in the
                RadInput control. To limit the number of characters accepted by the control, set
                the MaxLength property. If you want to prevent the text from being modified, set
                the ReadOnly property.</para>
            	<para>The value of this property, when set, can be saved automatically to a
                resource file by using a designer tool.</para>
            </remarks>
            <example>
            	<para>The following code example demonstrates how to use the Text property to
                specify the text displayed in the RadTextBox control.</para>
            	<para>[C#]</para>
            	<pre>
            &lt;/%@ Page Language="C#" AutoEventWireup="True" /%&gt;  <br/>
            &lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;  <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>
                "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>
                &lt;title&gt;RadTextBox Example &lt;/title&gt;<br/>
            		<br/>    &lt;script runat="server"&gt;<br/>
            		<br/>
            		<br/>        protected void AddButton_Click(object sender, EventArgs e)<br/>        {<br/> 
                       int Answer;<br/>
            		<br/>            Answer = Convert.ToInt32(Value1.Text) + Convert.ToInt32(Value2.Text);<br/>
            		<br/>            AnswerMessage.Text = Answer.ToString();<br/>        }<br/>&lt;/script&gt;<br/>
            		<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>
                        RadTextBox Example<br/>        &lt;/h3&gt;<br/>        &lt;table&gt;<br/>            &lt;tr&gt;<br/>
                            &lt;td colspan="5"&gt;<br/>                    Enter integer values into the text boxes.<br/>
                                &lt;br /&gt;<br/>                    Click the Add button to add the two values.<br/>
                                &lt;br /&gt;<br/>                    Click the Reset button to reset the text boxes.<br/>
                            &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/>
            		<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr align="center"&gt;<br/>
                            &lt;td&gt;<br/>                    &lt;rad:RadTextBox ID="Value1" Columns="2" MaxLength="3" Text="1" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    +<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    &lt;rad:RadTextBox ID="Value2" Columns="2" MaxLength="3" Text="1" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    =<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    &lt;asp:Label ID="AnswerMessage" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="2"&gt;<br/>
                                &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Value1"<br/>
                                    ErrorMessage="Please enter a value.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value1RangeValidator" ControlToValidate="Value1" Type="Integer"<br/>
                                    MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>
                            &lt;td colspan="2"&gt;<br/>
                                &lt;asp:RequiredFieldValidator ID="Value2RequiredValidator" ControlToValidate="Value2"<br/>
                                    ErrorMessage="Please enter a value.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value2RangeValidator" ControlToValidate="Value2" Type="Integer"<br/>
                                    MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>
                                &amp;nbsp<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr align="center"&gt;<br/>
                            &lt;td colspan="4"&gt;<br/>
                                &lt;asp:Button ID="AddButton" Text="Add" OnClick="AddButton_Click" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>
            		<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>        &lt;/table&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>
            &lt;/html&gt;
                </pre>
            	<para>[Visual Basic]</para>
            	<pre>
            &lt;/%@ Page Language="VB" AutoEventWireup="True" /%&gt;<br/><br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/>
            &lt;!DOCTYPE html Public "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>
                "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>
                &lt;title&gt;RadTextBox Example &lt;/title&gt;<br/><br/>    &lt;script runat="server"&gt;<br/><br/>
                  Protected Sub AddButton_Click(sender As Object, e As EventArgs)<br/><br/>         Dim Answer As Integer<br/><br/>
                     Answer = Convert.ToInt32(Value1.Text) + Convert.ToInt32(Value2.Text)<br/><br/>
                     AnswerMessage.Text = Answer.ToString()<br/><br/>      End Sub<br/><br/>    &lt;/script&gt;<br/><br/>&lt;/head&gt;<br/>
            &lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>            RadTextBox Example<br/>
                    &lt;/h3&gt;<br/>        &lt;table&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/> 
                               Enter Integer values into the text boxes.<br/>                    &lt;br /&gt;<br/>
                                Click the Add button To add the two values.<br/>                    &lt;br /&gt;<br/>
                                Click the Reset button To reset the text boxes.<br/>                &lt;/td&gt;<br/>
                        &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/><br/>                &lt;/td&gt;<br/>
                        &lt;/tr&gt;<br/>            &lt;tr align="center"&gt;<br/>                &lt;td&gt;<br/>
                                &lt;rad:RadTextBox ID="Value1" Columns="2" MaxLength="3" Text="1" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    +<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    &lt;rad:RadTextBox ID="Value2" Columns="2" MaxLength="3" Text="1" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    =<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    &lt;asp:Label ID="AnswerMessage" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>
                        &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="2"&gt;<br/>
                                &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Value1"<br/>
                                    ErrorMessage="Please enter a value.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value1RangeValidator" ControlToValidate="Value1" Type="Integer"<br/>
                                    MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>
                            &lt;td colspan="2"&gt;<br/>
                                &lt;asp:RequiredFieldValidator ID="Value2RequiredValidator" ControlToValidate="Value2"<br/>
                                    ErrorMessage="Please enter a value.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value2RangeValidator" ControlToValidate="Value2" Type="Integer"<br/>
                                    MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    &amp;nbsp<br/>
                            &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr align="center"&gt;<br/>                &lt;td colspan="4"&gt;<br/>
                                &lt;asp:Button ID="AddButton" Text="Add" OnClick="AddButton_Click" runat="server" /&gt;<br/>
                            &lt;/td&gt;<br/>
                            &lt;td&gt;<br/><br/>                &lt;/td&gt;<br/>
                        &lt;/tr&gt;<br/>        &lt;/table&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.ValidationGroup">
            <summary>
            Gets or sets the group of controls for which the ra.a.d.input control causes
            validation when it posts back to the server.
            </summary>
            <value>
            The group of controls for which the RadInput control causes validation when it
            posts back to the server. The default value is an empty string ("").
            </value>
            <remarks>
            	<para>Validation groups allow you to assign validation controls on a page to a
                specific category. Each validation group can be validated independently from other
                validation groups on the page. Use the ValidationGroup property to specify the name
                of the validation group for which the RadInput control causes validation when it
                posts back to the server.</para>
            	<para>This property has an effect only when the CausesValidation property is set to
                true. When you specify a value for the ValidationGroup property, only the
                validation controls that are part of the specified group are validated when the
                RadInput control posts back to the server. If you do not specify a value for
                this property and the CausesValidation property is set to true, all validation
                controls on the page that are not assigned to a validation group are validated when
                the control posts back to the server.</para>
            	<para>This property cannot be set by themes or style sheet themes.</para>
            </remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.EmptyMessageStyle">
            <summary>
            	<para>Gets the style properties for RadInput when when the control is
                empty.</para>
            </summary>
            <value>
            A Telerik.WebControls.TextBoxStyle object that represents the style properties
            for RadInput control. The default value is an empty TextBoxStyle object.
            </value>
            <example>
            	<para>The following code example demonstrates how to set EmptyMessageStyle
                property:</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;    <br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;   <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt; <br/>
            		<br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt; <br/>&lt;head runat="server"&gt; <br/>    &lt;title&gt;Untitled Page&lt;/title&gt; <br/>
            &lt;/head&gt; <br/>&lt;body&gt; <br/>    &lt;form id="form1" runat="server"&gt; <br/>
                    &lt;rad:RadTextBox EmptyMessage="EmptyMessage" ID="RadNumericTextBox1" runat="server"&gt; <br/>
                        &lt;EnabledStyle BackColor="red" /&gt; <br/>            &lt;EmptyMessageStyle BackColor="AliceBlue" /&gt; <br/>
                        &lt;FocusedStyle BackColor="yellow" /&gt; <br/>            &lt;HoveredStyle BackColor="blue" /&gt; <br/>
                    &lt;/rad:RadTextBox&gt; <br/>    &lt;/form&gt; <br/>&lt;/body&gt; <br/>&lt;/html&gt;
                </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
            <remarks>
            	<para>Use this property to provide a custom style for the empty message state of
                RadInput control. Common style attributes that can be adjusted include
                foreground color, background color, font, and alignment within the RadInput.
                Providing a different style enhances the appearance of the RadInput
                control.</para>
            	<para>Empty message style properties in the RadInput control are inherited from
                one style property to another through a hierarchy. For example, if you specify a
                red font for the EnabledStyle property, all other style properties in the
                RadInput control will also have a red font. This allows you to provide a common
                appearance for the control by setting a single style property. You can override the
                inherited style settings for an item style property that is higher in the hierarchy
                by setting its style properties. For example, you can specify a blue font for the
                FocusedStyle property, overriding the red font specified in the EnabledStyle
                property.</para>
            	<para>To specify a custom style, place the &lt;EmptyMessageStyle&gt; tags between
                the opening and closing tags of the RadInput control. You can then list the
                style attributes within the opening &lt;EmptyMessageStyle&gt; tag.</para>
            </remarks>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.FocusedStyle">
            <summary>Gets the style properties for focused RadInput control.</summary>
            <value>
            A Telerik.WebControls.TextBoxStyle object that represents the style properties
            for focused RadInput control. The default value is an empty TextBoxStyle
            object.
            </value>
            <example>
            	<para>The following code example demonstrates how to set FocusedStyle
                property:</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;    <br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;    <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt; <br/>
            		<br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt; <br/>&lt;head runat="server"&gt; <br/>
                &lt;title&gt;Untitled Page&lt;/title&gt; <br/>&lt;/head&gt; <br/>&lt;body&gt; <br/>
                &lt;form id="form1" runat="server"&gt; <br/>
                    &lt;rad:RadTextBox EmptyMessage="EmptyMessage" ID="RadNumericTextBox1" runat="server"&gt; <br/>
                        &lt;EnabledStyle BackColor="red" /&gt; <br/>            &lt;EmptyMessageStyle BackColor="AliceBlue" /&gt; <br/>
                        &lt;FocusedStyle BackColor="yellow" /&gt; <br/>            &lt;HoveredStyle BackColor="blue" /&gt; <br/>
                    &lt;/rad:RadTextBox&gt; <br/>    &lt;/form&gt; <br/>&lt;/body&gt; <br/>&lt;/html&gt;
                </pre>
            </example>
            <remarks>
            	<para>Use this property to provide a custom style for the focused RadInput
                control. Common style attributes that can be adjusted include foreground color,
                background color, font, and alignment within the RadInput. Providing a different
                style enhances the appearance of the RadInput control.</para>
            	<para>Focused style properties in the RadInput control are inherited from one
                style property to another through a hierarchy. For example, if you specify a red
                font for the EnabledStyle property, all other style properties in the RadInput
                control will also have a red font. This allows you to provide a common appearance
                for the control by setting a single style property. You can override the inherited
                style settings for an item style property that is higher in the hierarchy by
                setting its style properties. For example, you can specify a blue font for the
                FocusedStyle property, overriding the red font specified in the EnabledStyle
                property.</para>
            	<para>To specify a custom style, place the &lt;FocusedStyle&gt; tags between the
                opening and closing tags of the RadInput control. You can then list the style
                attributes within the opening &lt;FocusedStyle&gt; tag.</para>
            </remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.DisabledStyle">
            <summary>Gets the style properties for disabled RadInput control.</summary>
            <value>
            A Telerik.WebControls.TextBoxStyle object that represents the style properties
            for disabled RadInput control. The default value is an empty TextBoxStyle
            object.
            </value>
            <example>
            	<para>The following code example demonstrates how to set
                <strong>DisabledStyle</strong> property:</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;      <br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;      <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;  <br/>
            		<br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt;  <br/>&lt;head runat="server"&gt;  <br/>    &lt;title&gt;Untitled Page&lt;/title&gt;  <br/>
            &lt;/head&gt;  <br/>&lt;body&gt;  <br/>    &lt;form id="form1" runat="server"&gt;  <br/>
                    &lt;rad:RadTextBox EmptyMessage="EmptyMessage" ID="RadNumericTextBox1" runat="server"&gt;  <br/>
                        &lt;EnabledStyle BackColor="red" /&gt;  <br/>            &lt;EmptyMessageStyle BackColor="AliceBlue" /&gt;  <br/>
                        &lt;FocusedStyle BackColor="yellow" /&gt;  <br/>            &lt;HoveredStyle BackColor="blue" /&gt;  <br/>
                    &lt;/rad:RadTextBox&gt;  <br/>    &lt;/form&gt;  <br/>&lt;/body&gt;  <br/>&lt;/html&gt;
                </pre>
            </example>
            <remarks>
            	<para>Use this property to provide a custom style for the disabled RadInput
                control. Common style attributes that can be adjusted include foreground color,
                background color, font, and alignment within the RadInput. Providing a different
                style enhances the appearance of the RadInput control.</para>
            	<para>Disabled style properties in the RadInput control are inherited from one
                style property to another through a hierarchy. For example, if you specify a red
                font for the EnabledStyle property, all other style properties in the RadInput
                control will also have a red font. This allows you to provide a common appearance
                for the control by setting a single style property. You can override the inherited
                style settings for an item style property that is higher in the hierarchy by
                setting its style properties. For example, you can specify a blue font for the
                DisabledStyle property, overriding the red font specified in the EnabledStyle
                property.</para>
            	<para>To specify a custom style, place the &lt;DisabledStyle&gt; tags between the
                opening and closing tags of the RadInput control. You can then list the style
                attributes within the opening &lt;DisabledStyle&gt; tag.</para>
            </remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.InvalidStyle">
            <summary>Gets the style properties for invalid state of RadInput control.</summary>
            <value>
            A Telerik.WebControls.TextBoxStyle object that represents the style properties
            for invalid RadInput control. The default value is an empty TextBoxStyle
            object.
            </value>
            <example>
            	<para>The following code example demonstrates how to set InvalidStyle
                property:</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;      <br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;      <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;  <br/>
            		<br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt;  <br/>&lt;head runat="server"&gt;  <br/>    &lt;title&gt;Untitled Page&lt;/title&gt;  <br/>
            &lt;/head&gt;  <br/>&lt;body&gt;  <br/>    &lt;form id="form1" runat="server"&gt;  <br/>
                    &lt;rad:RadTextBox EmptyMessage="EmptyMessage" ID="RadNumericTextBox1" runat="server"&gt;  <br/>
                        &lt;EnabledStyle BackColor="red" /&gt;  <br/>            &lt;EmptyMessageStyle BackColor="AliceBlue" /&gt;  <br/>
                        &lt;FocusedStyle BackColor="yellow" /&gt;  <br/>            &lt;HoveredStyle BackColor="blue" /&gt;  <br/>        &lt;/rad:RadTextBox&gt;  <br/>
                &lt;/form&gt;  <br/>&lt;/body&gt;  <br/>&lt;/html&gt;<br/>
            	</pre>
            </example>
            <remarks>
            	<para>Use this property to provide a custom style for the invalid state RadInput
                control. Common style attributes that can be adjusted include foreground color,
                background color, font, and alignment within the RadInput. Providing a different
                style enhances the appearance of the RadInput control.</para>
            	<para>Enabled style properties in the RadInput control are inherited from one
                style property to another through a hierarchy. For example, if you specify a red
                font for the EnabledStyle property, all other style properties in the RadInput
                control will also have a red font. This allows you to provide a common appearance
                for the control by setting a single style property. You can override the inherited
                style settings for an item style property that is higher in the hierarchy by
                setting its style properties. For example, you can specify a blue font for the
                InvalidStyle property, overriding the red font specified in the EnabledStyle
                property.</para>
            	<para>To specify a custom style, place the &lt;InvalidStyle&gt; tags between the
                opening and closing tags of the RadInput control. You can then list the style
                attributes within the opening &lt;InvalidStyle&gt; tag.</para>
            </remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.HoveredStyle">
            <summary>Gets the style properties for hovered RadInput control.</summary>
            <value>
            A Telerik.WebControls.TextBoxStyle object that represents the style properties
            for hovered RadInput control. The default value is an empty TextBoxStyle
            object.
            </value>
            <example>
            	<para>The following code example demonstrates how to set HoveredStyle
                property:</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;     <br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;     <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt; <br/>
            		<br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt; <br/>&lt;head runat="server"&gt; <br/>
                &lt;title&gt;Untitled Page&lt;/title&gt; <br/>&lt;/head&gt; <br/>&lt;body&gt; <br/>    &lt;form id="form1" runat="server"&gt; <br/>
                    &lt;rad:RadTextBox EmptyMessage="EmptyMessage" ID="RadNumericTextBox1" runat="server"&gt; <br/>
                        &lt;EnabledStyle BackColor="red" /&gt; <br/>            &lt;EmptyMessageStyle BackColor="AliceBlue" /&gt; <br/>
                        &lt;FocusedStyle BackColor="yellow" /&gt; <br/>            &lt;HoveredStyle BackColor="blue" /&gt; <br/>
                    &lt;/rad:RadTextBox&gt; <br/>    &lt;/form&gt; <br/>&lt;/body&gt; <br/>&lt;/html&gt;
            </pre>
            </example>
            <remarks>
            	<para>Use this property to provide a custom style for the hovered RadInput
                control. Common style attributes that can be adjusted include foreground color,
                background color, font, and alignment within the RadInput. Providing a different
                style enhances the appearance of the RadInput control.</para>
            	<para>Hovered style properties in the RadInput control are inherited from one
                style property to another through a hierarchy. For example, if you specify a red
                font for the EnabledStyle property, all other style properties in the RadInput
                control will also have a red font. This allows you to provide a common appearance
                for the control by setting a single style property. You can override the inherited
                style settings for an item style property that is higher in the hierarchy by
                setting its style properties. For example, you can specify a blue font for the
                HoveredStyle property, overriding the red font specified in the EnabledStyle
                property.</para>
            	<para>To specify a custom style, place the &lt;HoveredStyle&gt; tags between the
                opening and closing tags of the RadInput control. You can then list the style
                attributes within the opening &lt;HoveredStyle&gt; tag.</para>
            </remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.EnabledStyle">
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
            <summary>Gets the style properties for enabled RadInput control.</summary>
            <value>
            A Telerik.WebControls.TextBoxStyle object that represents the style properties
            for enabled RadInput control. The default value is an empty TextBoxStyle
            object.
            </value>
            <remarks>
            	<para>Use this property to provide a custom style for the enabled RadInput
                control. Common style attributes that can be adjusted include foreground color,
                background color, font, and alignment within the RadInput. Providing a different
                style enhances the appearance of the RadInput control.</para>
            	<para>Enabled style properties in the RadInput control are inherited from one
                style property to another through a hierarchy. For example, if you specify a red
                font for the EnabledStyle property, all other style properties in the RadInput
                control will also have a red font. This allows you to provide a common appearance
                for the control by setting a single style property. You can override the inherited
                style settings for an item style property that is higher in the hierarchy by
                setting its style properties. For example, you can specify a blue font for the
                FocusedStyle property, overriding the red font specified in the EnabledStyle
                property.</para>
            	<para>To specify a custom style, place the &lt;EnabledStyle&gt; tags between the
                opening and closing tags of the RadInput control. You can then list the style
                attributes within the opening &lt;EnabledStyle&gt; tag.</para>
            </remarks>
            <example>
            	<para>The following code example demonstrates how to set EnabledStyle
                property:</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;    <br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;    <br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt; <br/>
            		<br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt; <br/>&lt;head runat="server"&gt; <br/>    &lt;title&gt;Untitled Page&lt;/title&gt; <br/>&lt;/head&gt; <br/>
            &lt;body&gt; <br/>    &lt;form id="form1" runat="server"&gt; <br/>
                    &lt;rad:RadTextBox EmptyMessage="EmptyMessage" ID="RadNumericTextBox1" runat="server"&gt; <br/>
                        &lt;EnabledStyle BackColor="red" /&gt; <br/>            &lt;EmptyMessageStyle BackColor="AliceBlue" /&gt; <br/>
                        &lt;FocusedStyle BackColor="yellow" /&gt; <br/>            &lt;HoveredStyle BackColor="blue" /&gt; <br/>
                    &lt;/rad:RadTextBox&gt; <br/>    &lt;/form&gt; <br/>&lt;/body&gt; <br/>&lt;/html&gt;
                </pre>
            </example>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.ButtonContainer">
            <summary>Gets control that contains the buttons of RadInput control</summary>
            <remarks>The ShowButton or ShowSpinButton properties must be set to true</remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.Skin">
            <summary>Gets or sets the skin used by RadInput control.</summary>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
            <value>A String specifying the skin. The default value is empty string ("").</value>
            <remarks>
            If the value is "None" no skin is used. If the value id "" (String.Empty) the
            default skin is used.
            </remarks>
        </member>
        <member name="P:Telerik.WebControls.RadInputControl.SkinsPath">
            <summary>Gets or sets the relative path of the folder containing the skins.</summary>
            <value>
            A string specifying the relative path to the folder which contains RadInput
            skins. The default value is "~/RadControls/Input/Skins".
            </value>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
            <remarks>
            RadInput ships with a set of predefined skins which are ready to use. They are
            located in RadControls/Input/Skins. If the skin folder is located in the project root
            and is named "Skins" the SkinsPath property should be set to: "~/Skins". Then you can
            create subfolders for individual skins e.g. Skins/Gold, Skins/Default etc.
            </remarks>
        </member>
        <member name="M:Telerik.WebControls.RadDateInput.Clear">
            <summary>
            Clears the selected date of the RadDateInput control and displays a blank date.
            </summary>
        </member>
        <member name="P:Telerik.WebControls.RadDateInput.ShortYearCenturyEnd">
            <summary>
            Gets or sets a value that indicates the end of the century that is used to interpret 
            the year value when a short year (single-digit or two-digit year) is entered in the input.
            </summary>
            <value>
            The year when the century ends. Default is 2029.
            </value>
            <remarks>
            Having a value of 2029 indicates that a short year will be interpreted as a year between 1930 and 2029. 
            For example 55 will be interpreted as 1955 but 12 -- as 2012 
            </remarks>
        </member>
        <member name="P:Telerik.WebControls.RadDateInput.ShortYearCenturyStart">
            <summary>
            Gets a value that indicates the start of the century that is used to interpret 
            the year value when a short year (single-digit or two-digit year) is entered in the input.
            </summary>
            <value>
            The year when the century starts. Default is 2029.
            </value>
            <remarks>
            Having a value of 2029 indicates that a short year will be interpreted as a year between 1930 and 2029. 
            For example 55 will be interpreted as 1955 but 12 -- as 2012 
            </remarks>
        </member>
        <member name="P:Telerik.WebControls.RadDateInput.DisplayDateFormat">
            <summary>
            	<para>Gets or sets the display date format used by
                <strong>RadDateInput</strong>.(Visible when the control is not on focus.)</para>
            </summary>
            <remarks>
            You can examine <see cref="T:System.Globalization.DateTimeFormatInfo">DateTimeFormatInfo</see> class for a list of all
            available format characters and patterns.
            </remarks>
            <example>
            	<code lang="CS">
            private void Page_Load(object sender, System.EventArgs e)
            {
                RadDateInput1.DisplayDateFormat = "M/d/yyyy"; //Short date pattern. The same as "d".
            }
                </code>
            	<code lang="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                RadDateInput1.DisplayDateFormat = "M/d/yyyy" 'Short date pattern. The same as "d".
            End Sub
                </code>
            </example>
            <value>
            	<para>A string specifying the display date format used by RadDateInput. The default
                value is "d" (short date format). If the <strong>DisplayDateFormat</strong> is left
                blank, the <strong>DateFormat</strong> will be used both for editing and
                display.</para>
            </value>
        </member>
        <member name="P:Telerik.WebControls.RadDateInput.DateFormat">
            <summary>
            Gets or sets the date and time format used by
            <strong>RadDateInput</strong>.
            </summary>
            <value>
            A string specifying the date format used by <strong>RadDateInput</strong>. The
            default value is "d" (short date format).
            </value>
            <example>
            	<code lang="CS" title="[New Example]">
            private void Page_Load(object sender, System.EventArgs e)
            {
                RadDateInput1.DateFormat = "M/d/yyyy"; //Short date pattern. The same as "d".
            }
                </code>
            	<code lang="VB" title="[New Example]">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                RadDateInput1.DateFormat = "M/d/yyyy" 'Short date pattern. The same as "d".
            End Sub
                </code>
            </example>
        </member>
        <member name="P:Telerik.WebControls.RadDateInput.SelectedDate">
            <summary>Gets or sets the date content of <strong>RadDateInput</strong>.</summary>
            <value>
                A <see cref="T:System.DateTime">DateTime</see> object that represents the selected
                date. The default value is <see cref="P:Telerik.WebControls.RadDateInput.MinDate">MinDate</see>.
            </value>
            <example>
                The following example demonstrates how to use the <strong>SelectedDate</strong>
                property to set the content of <strong>RadDateInput</strong>.
                <code lang="CS">
            private void Page_Load(object sender, System.EventArgs e)
            {
                RadDateInput1.SelectedDate = DateTime.Now;
            }
                </code>
            	<code lang="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                RadDateInput1.SelectedDate = DateTime.Now
            End Sub
                </code>
            </example>
        </member>
        <member name="P:Telerik.WebControls.RadDateInput.DbSelectedDate">
            <summary>
            Gets or sets the date content of <strong>RadDateInput</strong> in a
            database-friendly way.
            </summary>
            <value>
                A <see cref="T:System.DateTime">DateTime</see> object that represents the selected
                date. The default value is <see cref="P:Telerik.WebControls.RadDateInput.MinDate">MinDate</see>.
            </value>
            <example>
                The following example demonstrates how to use the <strong>SelectedDate</strong>
                property to set the content of RadDateInput. 
                <code lang="CS">
            private void Page_Load(object sender, System.EventArgs e)
            {
                RadDateInput1.DbSelectedDate = tableRow["BirthDate"];
            }
                </code>
            	<code lang="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                RadDateInput1.DbSelectedDate = tableRow("BirthDate")
            End Sub
                </code>
            </example>
            <remarks>
            This property behaves exactly like the <strong>SelectedDate</strong> property.
            The only difference is that it will not throw an exception if the new value is null or
            DBNull. Setting a null value will revert the selected date to the MinDate value.
            </remarks>
        </member>
        <member name="P:Telerik.WebControls.RadDateInput.Culture">
            <summary>
            Gets or sets the culture used by <strong>RadDateInput</strong> to format the
            date.
            </summary>
            <value>
                A <see cref="T:System.Globalization.CultureInfo">CultureInfo</see> object that
                represents the current culture used. The default value is
                <strong>System.Threading.Thread.CurrentThread.CurrentUICulture</strong>.
            </value>
            <example>
                The following example demonstrates how to use the <strong>Culture</strong>
                property. 
                <code lang="CS">
            private void Page_Load(object sender, System.EventArgs e)
            {
                RadDateInput1.Culture = new CultureInfo("en-US");
            }
                </code>
            	<code lang="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                RadDateInput1.Culture = New CultureInfo("en-US")
            End Sub
                </code>
            </example>
        </member>
        <member name="P:Telerik.WebControls.RadDateInput.ValidationDate">
            <summary>
            This property is used by the <strong>RadDateInput</strong>'s internals only. It
            is subject to change in the future versions. Please do not use.
            </summary>
        </member>
        <member name="P:Telerik.WebControls.RadDateInput.MinDate">
            <summary>
            Gets or sets the smallest date value allowed by
            <strong>RadDateInput</strong>.
            </summary>
            <value>
                A <see cref="T:System.DateTime">DateTime</see> object that represents the smallest
                date value by <strong>RadDateInput</strong>. The default value is 1/1/1980.
            </value>
        </member>
        <member name="P:Telerik.WebControls.RadDateInput.MaxDate">
            <summary>
            Gets or sets the largest date value allowed by
            <strong>RadDateInput</strong>.
            </summary>
            <value>
                A <see cref="T:System.DateTime">DateTime</see> object that represents the largest
                date value allowed by <strong>RadDateInput</strong>. The default value is
                <em>12/31/2099</em>.
            </value>
        </member>
        <member name="P:Telerik.WebControls.RadDateInput.IsEmpty">
            <summary>Used to determine if <strong>RadDateInput</strong> is empty.</summary>
            <value>
            	<strong>true</strong> if the date is empty; otherwise <strong>false</strong>.
            </value>
        </member>
        <member name="P:Telerik.WebControls.RadDateInput.OnClientDateChanged">
            <summary>
            Gets or sets the JavaScript event handler fired whenever the date of
            <strong>RadDateInput</strong> changes.
            </summary>
            <value>
            A string specifying the name of the JavaScript event handling routine. The
            default value is empty string ("").
            </value>
            <remarks>
                The event handler function is called with 2 parameters: 
                <list type="bullet">
            		<item>A reference to the <strong>RadDateInput</strong> object, which triggered
                    the event;</item>
            		<item>
                        An event arguments object that contains the following properties: 
                        <ul>
            				<li><strong>OldDate</strong> - The old date of the
                            <strong>RadDateInput</strong></li>
            				<li><strong>NewDate</strong> - The new date of the
                            <strong>RadDateInput</strong></li>
            			</ul>
            		</item>
            	</list>
            </remarks>
            <example>
            	<para>This example demonstrates the usage of the
                <strong>OnClientDateChanged</strong> property.</para>
            	<pre>
            &lt;script type="text/javascript&amp;quot&gt;<br/>function onDateChange(dateInput, args)<br/>{<br/>     alert("New date:" + args.NewDate);<br/>} <br/>&lt;/script&gt;<br/>
            		<br/>&lt;rad:RadDateInput<br/>      ID="RadDateInput1"<br/>      runat="server"<br/>      OnClientDateChanged="onDateChange"&gt;<br/>&lt;/rad:RadDateInput&gt;
                </pre>
            </example>
        </member>
        <member name="M:Telerik.WebControls.Design.DateFormatEditorDialog.InitializeComponent">
            <summary>
            Required method for Designer support - do not modify
            the contents of this method with the code editor.
            </summary>
        </member>
        <member name="M:Telerik.WebControls.Design.MaskEditorDialog.InitializeComponent">
            <summary>
            Required method for Designer support - do not modify
            the contents of this method with the code editor.
            </summary>
        </member>
        <member name="T:Telerik.WebControls.DigitMaskPart">
            <summary>Represents a single character, digit only mask part.</summary>
            <example>
                This example demonstrates how to add a <strong>DigitMaskPart</strong> object in the
                <strong>MaskParts</strong> property of RadMaskedTextBox.
                <code lang="CS">
            private void Page_Load(object sender, System.EventArgs e)
            { 
                DigitMaskPart digitPart = new DigitMaskPart();
                RadMaskedTextBox1.MaskParts.Add(digitPart);
            }
                </code>
            	<code lang="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                Dim digitPart As New DigitMaskPart()
                RadMaskedTextBox1.MaskParts.Add(digitPart)
            End Sub
                </code>
            </example>
        </member>
        <member name="T:Telerik.WebControls.MaskPart">
            <summary>The abstract base class of all mask parts.</summary>
            <remarks>This class is not intended to be used directly.</remarks>
        </member>
        <member name="P:Telerik.WebControls.MaskPart.Value">
            <exclude/>
            <excludetoc/>
        </member>
        <member name="M:Telerik.WebControls.DigitMaskPart.ToString">
            <summary>
            Returns the friendly name of the part.
            </summary>
        </member>
        <member name="P:Telerik.WebControls.DigitMaskPart.Value">
            <exclude/>
            <excludetoc/>
        </member>
        <member name="T:Telerik.WebControls.EnumerationMaskPart">
            <summary>
            Represents a MaskPart object which accepts only a predefined set of
            options.
            </summary>
            <example>
                This example demonstrates how to add an <strong>EnumerationMaskPart</strong> object
                in the <strong>MaskParts</strong> property of RadMaskedTextBox. 
                <code lang="CS">
            private void Page_Load(object sender, System.EventArgs e)
            { 
                EnumerationMaskPart enumPart = new EnumerationMaskPart();
                enumPart.Items.Add("Mon");
                enumPart.Items.Add("Two");
                enumPart.Items.Add("Wed");
                enumPart.Items.Add("Thu");
                enumPart.Items.Add("Fri");
                enumPart.Items.Add("Sat");
                enumPart.Items.Add("Sun");
                
                RadMaskedTextBox1.MaskParts.Add(enumPart);
            }
                </code>
            	<code lang="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                Dim  enumPart As New EnumerationMaskPart
                enumPart.Items.Add("Mon")
                enumPart.Items.Add("Two")
                enumPart.Items.Add("Wed")
                enumPart.Items.Add("Thu")
                enumPart.Items.Add("Fri")
                enumPart.Items.Add("Sat")
                enumPart.Items.Add("Sun")
                
                RadMaskedTextBox1.MaskParts.Add(enumPart)
            End Sub
                </code>
            </example>
        </member>
        <member name="M:Telerik.WebControls.EnumerationMaskPart.ToString">
            <summary>Returns the friendly name of the part.</summary>
        </member>
        <member name="P:Telerik.WebControls.EnumerationMaskPart.Items">
            <summary>
            Gets the options collection of the part.
            </summary>
        </member>
        <member name="P:Telerik.WebControls.EnumerationMaskPart.Value">
            <exclude/>
            <excludetoc/>
        </member>
        <member name="T:Telerik.WebControls.FreeMaskPart">
            <summary>
            Represents a single character MaskPart object which accepting any
            character.
            </summary>
            <example>
                This example demonstrates how to add a <strong>FreeMaskPart</strong> object in the
                <strong>MaskParts</strong> property of RadMaskedTextBox. 
                <code lang="CS" title=" ">
            private void Page_Load(object sender, System.EventArgs e)
            { 
                FreeMaskPart freePart = new FreeMaskPart();
                RadMaskedTextBox1.MaskParts.Add(freePart);
            }
                </code>
            	<code lang="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                Dim fixedPart As New FreeMaskPart()
                RadMaskedTextBox1.MaskParts.Add(fixedPart)
            End Sub
                </code>
            </example>
        </member>
        <member name="M:Telerik.WebControls.FreeMaskPart.ToString">
            <summary>
            Returns the friendly name of the part.
            </summary>
        </member>
        <member name="T:Telerik.WebControls.LiteralMaskPart">
            <summary>Represents a multi character MaskPart whose content cannot be modified.</summary>
            <example>
                This example demonstrates how to add a <strong>LiteralMaskPart</strong> object in
                the <strong>MaskParts</strong> property of RadMaskedTextBox.
                <code lang="CS">
            private void Page_Load(object sender, System.EventArgs e)
            { 
                LiteralMaskPart literalPart = new LiteralMaskPart();
                literalPart.Text = "(";
                RadMaskedTextBox1.MaskParts.Add(literalPart);
            }
                </code>
            	<code lang="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                Dim literalPart As New LiteralMaskPart()
                RadMaskedTextBox1.MaskParts.Add(literalPart)
            End Sub
                </code>
            </example>
        </member>
        <member name="M:Telerik.WebControls.LiteralMaskPart.ToString">
            <summary>
            Returns the friendly name of the part.
            </summary>
        </member>
        <member name="P:Telerik.WebControls.LiteralMaskPart.Value">
            <exclude/>
            <excludetoc/>
        </member>
        <member name="P:Telerik.WebControls.LiteralMaskPart.Text">
            <summary>Gets or sets the string that the LiteralMaskPart will render.</summary>
        </member>
        <member name="T:Telerik.WebControls.LowerMaskPart">
            <summary>
            Represents a single character MaskPart. The character is converted to lower upon
            input.
            </summary>
            <example>
                This example demonstrates how to add a <strong>LowerMaskPart</strong> object in the
                <strong>MaskParts</strong> property of RadMaskedTextBox. 
                <code lang="CS">
            private void Page_Load(object sender, System.EventArgs e)
            { 
                LowerMaskPart lowerPart = new LowerMaskPart();
                RadMaskedTextBox1.MaskParts.Add(lowerPart);
            }
                </code>
            	<code lang="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                Dim lowerPart As New LowerMaskPart()
                RadMaskedTextBox1.MaskParts.Add(lowerPart)
            End Sub
                </code>
            </example>
        </member>
        <member name="M:Telerik.WebControls.LowerMaskPart.ToString">
            <summary>
            Returns the friendly name of the part.
            </summary>
        </member>
        <member name="P:Telerik.WebControls.LowerMaskPart.Value">
            <exclude/>
            <excludetoc/>
        </member>
        <member name="T:Telerik.WebControls.MaskPartCollection">
            <summary>Represents the collection of mask parts in a RadMaskedTextBox.</summary>
        </member>
        <member name="M:Telerik.WebControls.MaskPartCollection.Add(Telerik.WebControls.MaskPart)">
            <summary>
                Appends the specified <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see> to
                the end of the collection.
            </summary>
            <param name="part">
                The <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see> to append to the
                collection.
            </param>
        </member>
        <member name="M:Telerik.WebControls.MaskPartCollection.Insert(System.Int32,Telerik.WebControls.MaskPart)">
            <summary>
                Inserts the specified <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see> in
                the collection at the specified index location.
            </summary>
            <param name="index">
                The location in the collection to insert the
                <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see>.
            </param>
            <param name="part">
                The <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see> to add to the
                collection.
            </param>
        </member>
        <member name="M:Telerik.WebControls.MaskPartCollection.Contains(Telerik.WebControls.MaskPart)">
            <summary>Determines whether the collection contains the specified item</summary>
            <returns>
            	<strong>true</strong> if the collection contains the specified
                <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see>; otherwise
                <strong>false</strong>.
            </returns>
            <param name="part">
                The <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see> to search for in the
                collection.
            </param>
        </member>
        <member name="M:Telerik.WebControls.MaskPartCollection.Remove(Telerik.WebControls.MaskPart)">
            <summary>
            	<para>
                    Removes the specified <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see>
                    from the collection.
                </para>
            </summary>
            <param name="part">
                The <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see> to remove from the
                collection.
            </param>
        </member>
        <member name="M:Telerik.WebControls.MaskPartCollection.IndexOf(Telerik.WebControls.MaskPart)">
            <summary>
                Determines the index value that represents the position of the specified
                <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see> in the collection.
            </summary>
            <returns>
                The zero-based index position of the specified
                <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see> in the collection.
            </returns>
            <param name="part">
                A <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see> to search for in the
                collection.
            </param>
        </member>
        <member name="P:Telerik.WebControls.MaskPartCollection.Owner">
            <summary>
            Gets or sets the <strong>RadMaskedInputControl</strong>, which uses the
            collection.
            </summary>
        </member>
        <member name="P:Telerik.WebControls.MaskPartCollection.Item(System.Int32)">
            <summary>
                Gets a <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see> at the specified
                index in the collection.
            </summary>
            <value>
                Use this indexer to get a <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see>
                from the
                <see cref="T:Telerik.WebControls.MaskPartCollection">MaskPartCollection</see> at the
                specified index, using array notation.
            </value>
            <param name="index">
                The zero-based index of the <see cref="T:Telerik.WebControls.MaskPart">MaskPart</see>
                to retrieve from the collection.
            </param>
        </member>
        <member name="T:Telerik.WebControls.NumericRangeMaskPart">
            <summary>Represents a MaskPart which accepts numbers in a specified range.</summary>
            <example>
                This example demonstrates how to add a <strong>NumericRangeMaskPart</strong> object
                in the <strong>MaskParts</strong> collection of RadMaskedTextBox. 
                <code lang="CS">
            private void Page_Load(object sender, System.EventArgs e)
            { 
                NumericRangeMaskPart rangePart = new NumericRangeMaskPart();
                rangePart.LowerLimit = 0;
                rangePart.UpperLimit = 255;
                RadMaskedTextBox1.MaskParts.Add(rangePart);
            }
                </code>
            	<code lang="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                Dim rangePart As New NumericRangeMaskPart()
                rangePart.LowerLimit = 0
                rangePart.UpperLimit = 255
                RadMaskedTextBox1.MaskParts.Add(rangePart)
            End Sub
                </code>
            </example>
        </member>
        <member name="M:Telerik.WebControls.NumericRangeMaskPart.ToString">
            <summary>Returns the friendly name of the part.</summary>
        </member>
        <member name="P:Telerik.WebControls.NumericRangeMaskPart.Value">
            <exclude/>
            <excludetoc/>
        </member>
        <member name="P:Telerik.WebControls.NumericRangeMaskPart.LowerLimit">
            <summary>Gets or sets the smallest possible value the part can accept.</summary>
            <value>
            An integer representing the smallest acceptable number that the
            NumericRangeMaskPart can accept. The default value is 0.
            </value>
        </member>
        <member name="P:Telerik.WebControls.NumericRangeMaskPart.UpperLimit">
            <summary>Gets or sets the largest possible value the part can accept.</summary>
            <value>
            An integer representing the largest acceptable number that the
            NumericRangeMaskPart can accept. The default value is 0.
            </value>
        </member>
        <member name="T:Telerik.WebControls.UpperMaskPart">
            <summary>
            Represents a single character MaskPart. The character is converted to upper upon
            input. .
            </summary>
            <example>
                This example demonstrates how to add an <strong>UpperMaskPart</strong> object in
                the <strong>MaskParts</strong> collection of RadMaskedTextBox. 
                <code lang="CS">
            private void Page_Load(object sender, System.EventArgs e)
            { 
                UpperMaskPart upperPart = new UpperMaskPart();
                RadMaskedTextBox1.MaskParts.Add(upperPart);
            }
                </code>
            	<code lang="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
                Dim upperPart As New UpperMaskPart()
                RadMaskedTextBox1.MaskParts.Add(upperPart)
            End Sub
                </code>
            </example>
        </member>
        <member name="M:Telerik.WebControls.UpperMaskPart.ToString">
            <summary>Returns the friendly name of the part.</summary>
        </member>
        <member name="T:Telerik.WebControls.NumericRangeAlign">
            <summary>
            Numeric range alignment options
            </summary>
        </member>
        <member name="F:Telerik.WebControls.NumericRangeAlign.Left">
            <summary>
            The numbers are aligned left
            </summary>
        </member>
        <member name="F:Telerik.WebControls.NumericRangeAlign.Right">
            <summary>
            The numbers are aligned right
            </summary>
        </member>
        <member name="P:Telerik.WebControls.RadMaskedTextBox.OnClientError">
            <summary>
            Gets or sets the JavaScript event handler fired when the user attempts to type
            unacceptable symbol into <strong>RadMaskedTextBox</strong>.
            </summary>
            <remarks>
                The event handler function is called with 2 parameters: 
                <list type="bullet">
            		<item>A reference to the <strong>control</strong> object that
                    triggered the event;</item>
            		<item>
                        An event arguments object with parameters specific to the control. 
                        <ul>
            				<li>Reason - an enumeration value containing the reason for the error: parse error, out of range, etc;</li>
            				<li>InputText - the currently entered text.</li>
            			</ul>
            		</item>
            	</list>
            </remarks>
            <example>
                This example demonstrates the usage of the <strong>OnClientDown</strong> property. 
                <code lang="CS">
            &lt;script&gt;
            function onError(input, args)
            {
               alert("Invalid character:" + args.NewValue);
            }
            &lt;/script&gt;
             
            &lt;rad:RadMaskedTextBox
                  ID="RadMaskedTextBox1"
                  runat="server"
                  Mask="&lt;0..255&gt;.&lt;0..255&gt;.&lt;0..255&gt;.&lt;0..255&gt;"
                  OnClientError="onError"&gt;
            &lt;/rad:RadMaskedTextBox&gt;
                </code>
            </example>
            <value>
            A string specifying the name of the JavaScript event handling routine. The
            default value is empty string ("").
            </value>
        </member>
        <member name="P:Telerik.WebControls.RadMaskedTextBox.OnClientValueChanged">
            <summary>
            Gets or sets the JavaScript event handler fired whenever the value of
            <strong>RadMaskedTextBox</strong> changes.
            </summary>
            <remarks>
                The event handler function is called with 2 parameters: 
                <list type="bullet">
            		<item>A reference to the <strong>RadMaskedTextBox</strong> object that
                    triggered the event;</item>
            		<item>
                        An event arguments object that contains the following properties: 
                        <ul>
            				<li>OldValue - The old value of the text box;</li>
            				<li>NewValue - The new value of the text box.</li>
            			</ul>
            		</item>
            	</list>
            </remarks>
            <value>
            A string specifying the name of the JavaScript event handling routine. The
            default value is an empty string ("").
            </value>
            <example>
                This example demonstrates the use of the <strong>OnClientValueChanged</strong>
                property.
                <code lang="CS">
            &lt;script&gt;
            function onChange (input, args)
            {
                 alert("Value changed from:" + args.OldValue + " to:" + args.NewValue);
            } 
            &lt;/script&gt;
             
            &lt;rad:RadMaskedTextBox
                  ID="RadMaskedTextBox1"
                  runat="server"
                  Mask="&lt;0..255&gt;.&lt;0..255&gt;.&lt;0..255&gt;.&lt;0..255&gt;"
                  OnClientValueChanged="onChange"&gt;
            &lt;/rad:RadMaskedTextBox&gt;
                </code>
            </example>
        </member>
        <member name="P:Telerik.WebControls.NumberFormatSettings.DecimalSeparator">
            <summary>Gets or sets the string to use as the decimal separator in values.</summary>
            <value>The string to use as the decimal separator in values.</value>
            <exception cref="!:" caption="ArgumentException">The property is being set to an empty string.</exception>
            <exception cref="!:" caption="ArgumentNullException">The property is being set to null. </exception>
        </member>
        <member name="P:Telerik.WebControls.NumberFormatSettings.DecimalDigits">
            <summary>Gets or sets the number of decimal places to use in numeric values</summary>
            <value>The number of decimal places to use in values.</value>
            <permission cref="!:" caption="ArgumentOutOfRangeException">The property is being set to a value that is less than 0 or greater than 99. </permission>
        </member>
        <member name="P:Telerik.WebControls.NumberFormatSettings.GroupSizes">
            <summary>
            Gets or sets the number of digits in each group to the left of the decimal in
            values.
            </summary>
            <value>The number of digits in each group to the left of the decimal in values.</value>
            <exception cref="!:" caption="ArgumentNullException">The property is being set to null. </exception>
        </member>
        <member name="P:Telerik.WebControls.NumberFormatSettings.GroupSeparator">
            <summary>
            Gets or sets the string that separates groups of digits to the left of the
            decimal in values.
            </summary>
            <value>
            The string that separates groups of digits to the left of the decimal in
            values.
            </value>
            <exception cref="!:" caption="ArgumentNullException">The property is being set to null. </exception>
        </member>
        <member name="P:Telerik.WebControls.NumberFormatSettings.NegativePattern">
            <summary>Gets or sets the format pattern for negative values.</summary>
            <value>The format pattern for negative percent values.</value>
            <exception cref="!:" caption="ArgumentOutOfRangeException">The property is being set to a value that is less than 0 or greater than 11. </exception>
        </member>
        <member name="P:Telerik.WebControls.NumberFormatSettings.PositivePattern">
            <summary>Gets or sets the format pattern for positive values.</summary>
            <value>The format pattern for positive percent values. The</value>
            <exception cref="!:" caption="ArgumentOutOfRangeException">The property is being set to a value that is less than 0 or greater than 3. </exception>
        </member>
        <member name="P:Telerik.WebControls.RadNumericTextBox.NegativeStyle">
            <summary>
            	<para>Gets the style properties for RadInput when when the text is
                negative.</para>
            </summary>
            <value>
            A Telerik.WebControls.TextBoxStyle object that represents the style properties
            for RadInput control. The default value is an empty TextBoxStyle object.
            </value>
            <example>
            	<para>The following code example demonstrates how to set NegativeStyle
                property:</para>
            	<para>[C#]</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;<br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;  <br/>&lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/><br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt;<br/>&lt;head runat="server"&gt;<br/>    &lt;title&gt;Untitled Page&lt;/title&gt;<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;rad:RadTextBox Text="-1" EmptyMessage="EmptyMessage" ID="RadNumericTextBox1" runat="server"&gt;<br/>            &lt;NegativeStyle BackColor="red" /&gt;<br/>        &lt;/rad:RadTextBox&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
            <remarks>
            	<para>Use this property to provide a custom style for the negative state of
                RadInput control. Common style attributes that can be adjusted include
                foreground color, background color, font, and alignment within the RadInput.
                Providing a different style enhances the appearance of the RadInput
                control.</para>
            	<para>Negative style properties in the RadInput control are inherited from one
                style property to another through a hierarchy. For example, if you specify a red
                font for the EnabledStyle property, all other style properties in the RadInput
                control will also have a red font. This allows you to provide a common appearance
                for the control by setting a single style property. You can override the inherited
                style settings for an item style property that is higher in the hierarchy by
                setting its style properties. For example, you can specify a blue font for the
                NegativeStyle property, overriding the red font specified in the EnabledStyle
                property.</para>
            	<para>To specify a custom style, place the &lt;NegativeStyle&gt; tags between the
                opening and closing tags of the RadInput control. You can then list the style
                attributes within the opening &lt;NegativeStyle&gt; tag.</para>
            </remarks>
        </member>
        <member name="P:Telerik.WebControls.RadNumericTextBox.Value">
            <summary>Gets or sets the value of the RadInput control.</summary>
            <remarks>
            	<para>Use the Text property to specify or determine the text displayed in the
                RadInput control. To limit the number of characters accepted by the control, set
                the MaxLength property. If you want to prevent the text from being modified, set
                the ReadOnly property.</para>
            	<para>The value of this property, when set, can be saved automatically to a
                resource file by using a designer tool.</para>
            </remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
            <value>
            null if the Text property is Empty.The Value property are Nullable Double type. A
            nullable type can represent the normal range of values for its underlying value type,
            plus an additional null value. For example, a Nullable&lt;Double&gt;, pronounced
            "Nullable of Double," can be assigned any value from double.MinValue to
            double.MaxValue, or it can be assigned the null value.
            </value>
        </member>
        <member name="P:Telerik.WebControls.RadNumericTextBox.DbValue">
            <summary>
            Gets or sets the date content of RadNumericTextBox in a database friendly
            way.
            </summary>
            <value>An object that represents the Text property. The default value is null.</value>
            <remarks>
            This property behaves exactly like the Value property. The only difference is
            that it will not throw an exception if the new value is not double object (or null). If
            you assign null to the control you will see blank RadInput.
            </remarks>
            <example>
            	<para>The following example demonstrates how to bind the RadNumericTextBox:</para>
            	<para>[C#]</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;<br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/>&lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/><br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt;<br/>&lt;head runat="server"&gt;<br/>&lt;title&gt;Untitled Page&lt;/title&gt;<br/>&lt;script runat="server"&gt;<br/>protected void Page_Load(object sender, EventArgs e)<br/>{<br/>  System.Data.DataTable table = new System.Data.DataTable();<br/>  table.Columns.Add("num");<br/>
            		<br/>    System.Data.DataRow row = table.NewRow();<br/>   row["num"] = (double)12.56;<br/> table.Rows.Add(row);<br/>
            		<br/>    row = table.NewRow();<br/>       row["num"] = (int)12;<br/>       table.Rows.Add(row);<br/>
            		<br/>    row = table.NewRow();<br/>       row["num"] = DBNull.Value;<br/>  table.Rows.Add(row);<br/>
            		<br/>    row = table.NewRow();<br/>       row["num"] = "33";<br/>  table.Rows.Add(row);<br/>
            		<br/>    row = table.NewRow();<br/>       table.Rows.Add(row);<br/>
            		<br/>    Repeater1.DataSource = table;<br/>       Repeater1.DataBind();<br/>}<br/>&lt;/script&gt;<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>&lt;form id="form1" runat="server"&gt;<br/>    &lt;asp:Repeater runat="server" ID="Repeater1"&gt;<br/>          &lt;ItemTemplate&gt;<br/>                        &lt;rad:RadNumericTextBox DbValue='&lt;/%# Bind("num") /%&gt;'<br/>                             ID="RadNumericTextBox1" runat="server"&gt;<br/>                  &lt;/rad:RadNumericTextBox&gt;<br/>             &lt;/ItemTemplate&gt;<br/>       &lt;/asp:Repeater&gt;<br/>&lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            	<para>[VisualBasic]</para>
            	<pre>
            &lt;/%@ Page Language="VB" /%&gt;<br/><br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/><br/>&lt;!DOCTYPE html Public "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/><br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt;<br/>&lt;head runat="server"&gt;<br/>&lt;title&gt;Untitled Page&lt;/title&gt;<br/>&lt;script runat="server"&gt;<br/>Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load<br/>      Dim table As System.Data.DataTable = New System.Data.DataTable<br/>      table.Columns.Add("num")<br/>    Dim row As System.Data.DataRow = table.NewRow<br/>       row("num") = CType(12.56,Double)<br/>    table.Rows.Add(row)<br/> row = table.NewRow<br/>  row("num") = CType(12,Integer)<br/>      table.Rows.Add(row)<br/> row = table.NewRow<br/>  row("num") = DBNull.Value<br/>   table.Rows.Add(row)<br/> row = table.NewRow<br/>  row("num") = "33"<br/>   table.Rows.Add(row)<br/> row = table.NewRow<br/>  table.Rows.Add(row)<br/> Repeater1.DataSource = table<br/>        Repeater1.DataBind<br/>End Sub<br/>&lt;/script&gt;<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>&lt;form id="form1" runat="server"&gt;<br/> &lt;asp:Repeater runat="server" ID="Repeater1"&gt;<br/>          &lt;ItemTemplate&gt;<br/>                        &lt;rad:RadNumericTextBox DbValue='&lt;/%# Bind("num") /%&gt;'<br/>                             ID="RadNumericTextBox1" runat="server"&gt;<br/>                  &lt;/rad:RadNumericTextBox&gt;<br/>             &lt;/ItemTemplate&gt;<br/>       &lt;/asp:Repeater&gt;<br/>&lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadNumericTextBox.ShowSpinButtons">
            <summary>
            Gets or sets a value indicating whether the button is displayed in the
            RadInput control.
            </summary>
            <value>
            true if the button is displayed; otherwise, false. The default value is true,
            however this property is only examined when the ButtonTemplate property is not a null
            reference (Nothing in Visual Basic).
            </value>
            <remarks>
            	<para>Use the ShowButton property to specify whether the button is displayed in the
                RadInput control.</para>
            	<para>The contents of the button are controlled by the ButtonTemplate
                property.</para>
            </remarks>
            <example>
            	<para>The following code example demonstrates how to use the ShowButton property to
                display the button in the RadInput control.</para>
            	<para>[C#]</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;<br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/>&lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" &gt;<br/>
            		<br/>&lt;html xmlns="http://www.w3.org/1999/xhtml" &gt;<br/>&lt;head id="Head1" runat="server"&gt;<br/>    &lt;title&gt;Untitled Page&lt;/title&gt;<br/>    &lt;script language="javascript" type="text/javascript"&gt;<br/>    function Click(sender)<br/>    {<br/>        alert("click");<br/>    }<br/>    &lt;/script&gt;<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;rad:RadTextBox ShowButton="true" ID="RadNumericTextBox1" runat="server"&gt;<br/>            &lt;ClientEvents OnButtonClick="Click" /&gt;<br/>            &lt;ButtonTemplate&gt;<br/>               &lt;input type="button" value="click here"  /&gt;<br/>            &lt;/ButtonTemplate&gt;<br/>        &lt;/rad:RadTextBox&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
            </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadNumericTextBox.Culture">
            <summary>Gets or sets the culture used by RadNumericTextBox to format the numburs.</summary>
            <value>
            A CultureInfo object that represents the current culture used. The default value
            is System.Threading.Thread.CurrentThread.CurrentUICulture.
            </value>
            <example>
                The following example demonstrates how to use the Culture property. 
                <code lang="CS" title="C#">
            private void Page_Load(object sender, System.EventArgs e)
            {
            RadNumericTextBox.Culture = new CultureInfo("en-US");
            }
                </code>
            	<code lang="VB" title="VB">
            Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
            RadNumericTextBox1.Culture = New CultureInfo("en-US")
            End Sub
                </code>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadNumericTextBox.MaxValue">
            <summary>Gets or sets the largest possible value of a RadNumericTextBox.</summary>
            <value>The default value is positive 70368744177664.</value>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadNumericTextBox.MinValue">
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
            <summary>
            	<br/>
            Gets or sets the smallest possible value of a RadNumericTextBox.
            </summary>
            <value>The default value is negative -70368744177664.</value>
        </member>
        <member name="P:Telerik.WebControls.RadNumericTextBox.Type">
            <summary>Gets or sets the numeric type of the RadNumericTextBox.</summary>
            <value>One of the NumericType enumeration values. The default is Number.</value>
            <remarks>
            Use the Type property to determine the numeric type that the RadNumericTextBox
            represents. The Type property is represented by one of the NumericType enumeration
            values.
            </remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadNumericTextBox.ButtonDownContainer">
            <summary>Gets control that contains the up button of RadInput control</summary>
            <remarks>The ShowButton or ShowSpinButton properties must be set to true</remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadNumericTextBox.ButtonUpContainer">
            <summary>Gets control that contains the up button of RadInput control</summary>
            <remarks>The ShowButton or ShowSpinButton properties must be set to true</remarks>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="T:Telerik.WebControls.Ide.Common.RadInput.ProjectManagement">
            <summary>
            Utility class for Design - Time VisualStudio.NET project management.
            </summary>
        </member>
        <member name="T:Telerik.RadInputUtils.PropertyCategory">
            <summary>
            Defines the common property categories' names
            </summary>
        </member>
        <member name="P:Telerik.WebControls.RadTextBox.TextMode">
            <summary>
            Gets or sets the behavior mode (single-line, multiline, or password) of the
            RadTextBox control.
            </summary>
            <value>
            One of the RadInputTextBoxMode enumeration values. The default value is
            SingleLine.
            </value>
            <remarks>
            	<para>Use the TextMode property to specify whether a RadTextBox control is
                displayed as a single-line, multiline, or password text box.</para>
            	<para>When the RadTextBox control is in multiline mode, you can control the number
                of rows displayed by setting the Rows property. You can also specify whether the
                text should wrap by setting the Wrap property.</para>
            	<para>If the RadTextBox control is in password mode, all characters entered in the
                control are masked.</para>
            	<para>This property cannot be set by themes or style sheet themes</para>
            </remarks>
            <exception cref="T:System.ArgumentOutOfRangeException" caption="System.ArgumentOutOfRangeException">The specified mode is not one of the TextBoxMode enumeration values.</exception>
            <example>
                The following code example demonstrates how to use the RadTextMode property to
                specify a multiline text box. This example has a text box that accepts user input,
                which is a potential security threat. By default, ASP.NET Web pages validate that
                user input does not include script or HTML elements. 
                <code lang="VB" title="Visual Basic">
            &lt;%@ Page Language="VB" AutoEventWireup="True" %&gt;
             
            &lt;%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" %&gt;
             
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
                "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;
            &lt;html&gt;
            &lt;head&gt;
                &lt;title&gt;MultiLine RadTextBox Example &lt;/title&gt;
             
                &lt;script runat="server"&gt;
             
                  Protected Sub SubmitButton_Click(sender As Object, e As EventArgs )
                           
                     Message.Text = "Thank you for your comment: &lt;br /&gt;" + Comment.Text
             
                  End Sub
             
                  Protected Sub Check_Change(sender As Object, e As EventArgs )
                     
                     Comment.Wrap = WrapCheckBox.Checked
                     Comment.ReadOnly = ReadOnlyCheckBox.Checked
             
                  End Sub
             
                &lt;/script&gt;
             
            &lt;/head&gt;
            &lt;body&gt;
                &lt;form id="form1" runat="server"&gt;
                    &lt;h3&gt;
                        MultiLine RadTextBox Example
                    &lt;/h3&gt;
                    Please enter a comment and click the submit button.
                    &lt;br /&gt;
                    &lt;br /&gt;
                    &lt;rad:RadTextBox ID="Comment" TextMode="MultiLine" Columns="50" Rows="5" runat="server" /&gt;
                    &lt;br /&gt;
                    &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Comment"
                        ErrorMessage="Please enter a comment.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;
                    &lt;asp:CheckBox ID="WrapCheckBox" Text="Wrap Text" Checked="True" AutoPostBack="True"
                        OnCheckedChanged="Check_Change" runat="server" /&gt;
                      
                    &lt;asp:CheckBox ID="ReadOnlyCheckBox" Text="ReadOnly" Checked="False" AutoPostBack="True"
                        OnCheckedChanged="Check_Change" runat="server" /&gt;
                      
                    &lt;asp:Button ID="SubmitButton" Text="Submit" OnClick="SubmitButton_Click" runat="server" /&gt;
                    &lt;hr /&gt;
                    &lt;asp:Label ID="Message" runat="server" /&gt;
                &lt;/form&gt;
            &lt;/body&gt;
            &lt;/html&gt;
                </code>
            	<code lang="CS" title="C#">
            &lt;%@ Page Language="C#" AutoEventWireup="True" %&gt;
             
            &lt;%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" %&gt;
             
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
                "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;
            &lt;html&gt;
            &lt;head&gt;
                &lt;title&gt;MultiLine RadTextBox Example &lt;/title&gt;
             
                &lt;script runat="server"&gt;
             
                    protected void SubmitButton_Click(Object sender, EventArgs e)
                    {
             
                        Message.Text = "Thank you for your comment: &lt;br /&gt;" + Comment.Text;
             
                    }
             
                    protected void Check_Change(Object sender, EventArgs e)
                    {
             
                        Comment.Wrap = WrapCheckBox.Checked;
                        Comment.ReadOnly = ReadOnlyCheckBox.Checked;
             
                    }
             
                &lt;/script&gt;
             
            &lt;/head&gt;
            &lt;body&gt;
                &lt;form id="form1" runat="server"&gt;
                    &lt;h3&gt;
                        MultiLine RadTextBox Example
                    &lt;/h3&gt;
                    Please enter a comment and click the submit button.
                    &lt;br /&gt;
                    &lt;br /&gt;
                    &lt;rad:RadTextBox ID="Comment" TextMode="MultiLine" Columns="50" Rows="5" runat="server" /&gt;
                    &lt;br /&gt;
                    &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Comment"
                        ErrorMessage="Please enter a comment.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;
                    &lt;asp:CheckBox ID="WrapCheckBox" Text="Wrap Text" Checked="True" AutoPostBack="True"
                        OnCheckedChanged="Check_Change" runat="server" /&gt;
                      
                    &lt;asp:CheckBox ID="ReadOnlyCheckBox" Text="ReadOnly" Checked="False" AutoPostBack="True"
                        OnCheckedChanged="Check_Change" runat="server" /&gt;
                      
                    &lt;asp:Button ID="SubmitButton" Text="Submit" OnClick="SubmitButton_Click" runat="server" /&gt;
                    &lt;hr /&gt;
                    &lt;asp:Label ID="Message" runat="server" /&gt;
                &lt;/form&gt;
            &lt;/body&gt;
            &lt;/html&gt;
                </code>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadTextBox.AutoCompleteType">
            <summary>
            Gets or sets a value that indicates the AutoComplete behavior of the RadTextBox
            control
            </summary>
            <value>
            One of the System.Web.UI.WebControls.AutoCompleteType enumeration values,
            indicating the AutoComplete behavior for the RadTextBox control. The default value is
            None.
            </value>
            <exception cref="T:System.ArgumentOutOfRangeException" caption="System.ArgumentOutOfRangeException">The selected value is not one of the System.Web.UI.WebControls.AutoCompleteType enumeration values.</exception>
            <remarks>
            	<para>To assist with data entry, Microsoft Internet Explorer 5 and later and
                Netscape support a feature called AutoComplete. AutoComplete monitors a RadTextBox
                and creates a list of values entered by the user. When the user returns to the
                RadTextBox at a later time, the list is displayed. Instead of retyping a previously
                entered value, the user can simply select the value from this list. Use the
                AutoCompleteType property to control the behavior of the AutoComplete feature for a
                RadTextBox control. The System.Web.UI.WebControls.AutoCompleteType enumeration is
                used to represent the values that you can apply to the AutoCompleteType property.
                Not all browsers support the AutoComplete feature. Check with your browser to
                determine compatibility.</para>
            	<para>By default, the AutoCompleteType property for a RadTextBox control is set to
                AutoCompleteType.None. With this setting, the RadTextBox control shares the list
                with other RadTextBox controls with the same ID property across different pages.
                You can also share a list between RadTextBox controls based on a category, instead
                of an ID property. When you set the AutoCompleteType property to one of the
                category values (such as AutoCompleteType.FirstName, AutoCompleteType.LastName, and
                so on), all RadTextBox controls with the same category share the same list. You can
                disable the AutoComplete feature for a RadTextBox control by setting the
                AutoCompleteType property to AutoCompleteType.Disabled.</para>
            	<para>Refer to your browser documentation for details on configuring and enabling
                the AutoComplete feature. For example, to enable the AutoComplete feature in
                Internet Explorer version 5 or later, select Internet Options from the Tools menu,
                and then select the Content tab. Click the AutoComplete button to view and modify
                the various browser options for the AutoComplete feature.</para>
            	<para>This property cannot be set by themes or style sheet themes.</para>
            </remarks>
            <example>
            	<para>The following code example demonstrates how to use the AutoCompleteType
                enumeration to specify the AutoComplete category for a RadTextBox control. This
                example has a text box that accepts user input, which is a potential security
                threat. By default, ASP.NET Web pages validate that user input does not include
                script or HTML elements.</para>
            	<para>[C#]</para>
            	<pre>
            &lt;/%@ Page Language="C#" /%&gt;<br/>
            		<br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/>
            		<br/>&lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>
            &lt;html&gt;<br/>&lt;head id="Head1" runat="server"&gt;<br/>    &lt;title&gt;AutoCompleteType example&lt;/title&gt;<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>
                &lt;form id="form1" runat="server"&gt;<br/>        &lt;!-- You need to enable the AutoComplete feature on --&gt;<br/>
                    &lt;!-- a browser that supports it (such as Internet   --&gt;<br/>        &lt;!-- Explorer 5.0 and later) for this sample to     --&gt;<br/>
                    &lt;!-- work. The AutoComplete lists are created after --&gt;<br/>        &lt;!-- the Submit button is clicked.                  --&gt;<br/>
                    &lt;h3&gt;<br/>            AutoCompleteType example&lt;/h3&gt;<br/>        Enter values in the text boxes and click the Submit<br/>        &lt;br /&gt;<br/>
                    button.<br/>        &lt;br /&gt;<br/>        &lt;br /&gt;<br/>        &lt;!-- The following TextBox controls have different  --&gt;<br/>
                    &lt;!-- categories assigned to their AutoCompleteType  --&gt;<br/>        &lt;!-- properties.                                    --&gt;<br/>
                    First Name:&lt;br /&gt;<br/>        &lt;rad:RadTextBox ID="FirstNameTextBox" AutoCompleteType="FirstName" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>
                    Last Name:&lt;br /&gt;<br/>        &lt;rad:RadTextBox ID="LastNameTextBox" AutoCompleteType="LastName" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>
                    Email:&lt;br /&gt;<br/>        &lt;rad:RadTextBox ID="EmailTextBox" AutoCompleteType="Email" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>
                    &lt;!-- The following TextBox controls have the same   --&gt;<br/>        &lt;!-- categories assigned to their AutoCompleteType  --&gt;<br/>
                    &lt;!-- properties. They share the same AutoComplete   --&gt;<br/>        &lt;!-- list.                                          --&gt;<br/>        Phone Line #1:&lt;br /&gt;<br/>
                    &lt;rad:RadTextBox ID="Phone1TextBox" AutoCompleteType="HomePhone" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>        Phone Line #2:&lt;br /&gt;<br/>
                    &lt;rad:RadTextBox ID="Phone2TextBox" AutoCompleteType="HomePhone" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>
                    &lt;!-- The following TextBox control has its          --&gt;<br/>        &lt;!-- AutoCompleteType property set to               --&gt;<br/>
                    &lt;!-- AutoCompleteType.None. All TextBox controls    --&gt;<br/>
                    &lt;!-- with the same ID across different pages share  --&gt;<br/>        &lt;!-- the same AutoComplete list.                    --&gt;<br/>        Category:&lt;br /&gt;<br/>
                    &lt;rad:RadTextBox ID="CategoryTextBox" AutoCompleteType="None" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>        &lt;!-- The following TextBox control has the          --&gt;<br/>
                    &lt;!-- AutoComplete feature disabled.                 --&gt;<br/>        Comments:&lt;br /&gt;<br/>        &lt;rad:RadTextBox ID="CommentsTextBox" AutoCompleteType="Disabled" runat="server" /&gt;<br/>
                    &lt;br /&gt;<br/>        &lt;br /&gt;<br/>        &lt;br /&gt;<br/>        &lt;asp:Button ID="SubmitButton" Text="Submit" runat="Server" /&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;<br/>
            	</pre>
            	<para>[Visual Basic]</para>
            	<pre>
            &lt;/%@ Page Language="VB" /%&gt;<br/><br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/><br/>
            &lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head id="Head1" runat="server"&gt;<br/>
                &lt;title&gt;AutoCompleteType example&lt;/title&gt;<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;!-- You need to enable the AutoComplete feature on --&gt;<br/>
                    &lt;!-- a browser that supports it (such as Internet --&gt;<br/>        &lt;!-- Explorer 5.0 and later) for this sample to --&gt;<br/>        &lt;!-- work. The AutoComplete lists are created after --&gt;<br/>
                    &lt;!-- the Submit button is clicked. --&gt;<br/>        &lt;h3&gt;<br/>            AutoCompleteType example&lt;/h3&gt;<br/>        Enter values in the text boxes and click the Submit<br/>        &lt;br /&gt;<br/>
                    button.<br/>        &lt;br /&gt;<br/>        &lt;br /&gt;<br/>        &lt;!-- The following TextBox controls have different --&gt;<br/>        &lt;!-- categories assigned to their AutoCompleteType --&gt;<br/>
                    &lt;!-- properties. --&gt;<br/>        First Name:&lt;br /&gt;<br/>        &lt;rad:RadTextBox ID="FirstNameTextBox" AutoCompleteType="FirstName" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>
                    Last Name:&lt;br /&gt;<br/>        &lt;rad:RadTextBox ID="LastNameTextBox" AutoCompleteType="LastName" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>        Email:&lt;br /&gt;<br/>
                    &lt;rad:RadTextBox ID="EmailTextBox" AutoCompleteType="Email" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>        &lt;!-- The following TextBox controls have the same --&gt;<br/>
                    &lt;!-- categories assigned to their AutoCompleteType --&gt;<br/>        &lt;!-- properties. They share the same AutoComplete --&gt;<br/>        &lt;!-- list. --&gt;<br/>        Phone Line #1:&lt;br /&gt;<br/>
                    &lt;rad:RadTextBox ID="Phone1TextBox" AutoCompleteType="HomePhone" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>        Phone Line #2:&lt;br /&gt;<br/>        &lt;rad:RadTextBox ID="Phone2TextBox" AutoCompleteType="HomePhone" runat="server" /&gt;<br/>
                    &lt;br /&gt;<br/>        &lt;!-- The following TextBox control has its --&gt;<br/>        &lt;!-- AutoCompleteType property set to --&gt;<br/>        &lt;!-- AutoCompleteType.None. All TextBox controls --&gt;<br/>        &lt;!-- with the same ID across different pages share --&gt;<br/>
                    &lt;!-- the same AutoComplete list. --&gt;<br/>        Category:&lt;br /&gt;<br/>        &lt;rad:RadTextBox ID="CategoryTextBox" AutoCompleteType="None" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>        &lt;!-- The following TextBox control has the --&gt;<br/>
                    &lt;!-- AutoComplete feature disabled. --&gt;<br/>        Comments:&lt;br /&gt;<br/>        &lt;rad:RadTextBox ID="CommentsTextBox" AutoCompleteType="Disabled" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>        &lt;br /&gt;<br/>        &lt;br /&gt;<br/>        &lt;asp:Button ID="SubmitButton" Text="Submit" runat="Server" /&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadTextBox.Rows">
            <summary>Gets or sets the number of rows displayed in a multiline RadTextBox.</summary>
            <value>
            The number of rows in a multiline RadTextBox. The default is 0, which displays a
            two-line text box.
            </value>
            <remarks>
            Use the Rows property to specify the number of rows displayed in a multiline
            RadTextBox. This property is applicable only when the TextMode property is set to
            MultiLine. This property cannot be set by themes or style sheet themes. This example
            has a text box that accepts user input, which is a potential security threat. By
            default, ASP.NET Web pages validate that user input does not include script or HTML
            elements.
            </remarks>
            <example>
            	<para>The following code example demonstrates how to use the Rows property to
                specify a height of 5 rows for a multiline RadTextBox control.</para>
            	<para>[C#]</para>
            	<pre>
            &lt;/%@ Page Language="C#" AutoEventWireup="True" /%&gt;<br/>
            		<br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/>
            		<br/>&lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>    &lt;title&gt;MultiLine TextBox Example &lt;/title&gt;<br/>
            		<br/>    &lt;script runat="server"&gt;<br/>        protected void SubmitButton_Click(Object sender, EventArgs e)<br/>        {  <br/>            Message.Text = "Thank you for your comment: &lt;br /&gt;" + Comment.Text;  <br/>        }<br/>
            		<br/>        protected void Check_Change(Object sender, EventArgs e)<br/>        {  <br/>            Comment.Wrap = WrapCheckBox.Checked;<br/>            Comment.ReadOnly = ReadOnlyCheckBox.Checked;  <br/>        }<br/>
            		<br/>    &lt;/script&gt;<br/>
            		<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>            MultiLine TextBox Example<br/>        &lt;/h3&gt;<br/>        Please enter a comment and click the submit button.<br/>        &lt;br /&gt;<br/>        &lt;br /&gt;<br/>
                    &lt;rad:RadTextBox ID="Comment" TextMode="MultiLine" Columns="50" Rows="5" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>        &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Comment"<br/>            ErrorMessage="Please enter a comment.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                    &lt;asp:CheckBox ID="WrapCheckBox" Text="Wrap Text" Checked="True" AutoPostBack="True"<br/>            OnCheckedChanged="Check_Change" runat="server" /&gt;<br/>
            		<br/>        &lt;asp:CheckBox ID="ReadOnlyCheckBox" Text="ReadOnly" Checked="False" AutoPostBack="True"<br/>            OnCheckedChanged="Check_Change" runat="server" /&gt;<br/>
            		<br/>        &lt;asp:Button ID="SubmitButton" Text="Submit" OnClick="SubmitButton_Click" runat="server" /&gt;<br/>        &lt;hr /&gt;<br/>        &lt;asp:Label ID="Message" runat="server" /&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            	<para>[Visual Basic]</para>
            	<pre>
            &lt;/%@ Page Language="VB" AutoEventWireup="True" /%&gt;<br/><br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/><br/>&lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>
                "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>    &lt;title&gt;MultiLine RadTextBox Example &lt;/title&gt;<br/><br/>    &lt;script runat="server"&gt;<br/><br/>      Protected Sub SubmitButton_Click(sender As Object, e As EventArgs )<br/><br/>
                     Message.Text = "Thank you for your comment: &lt;br /&gt;" + Comment.Text<br/><br/>      End Sub<br/><br/>      Protected Sub Check_Change(sender As Object, e As EventArgs )<br/><br/>         Comment.Wrap = WrapCheckBox.Checked<br/>         Comment.ReadOnly = ReadOnlyCheckBox.Checked<br/><br/>      End Sub<br/><br/>    &lt;/script&gt;<br/><br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>
                &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>            MultiLine RadTextBox Example<br/>        &lt;/h3&gt;<br/>        Please enter a comment and click the submit button.<br/>        &lt;br /&gt;<br/>        &lt;br /&gt;<br/>        &lt;rad:RadTextBox ID="Comment" TextMode="MultiLine" Columns="50" Rows="5" runat="server" /&gt;<br/>
                    &lt;br /&gt;<br/>        &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Comment"<br/>            ErrorMessage="Please enter a comment.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>        &lt;asp:CheckBox ID="WrapCheckBox" Text="Wrap Text" Checked="True" AutoPostBack="True"<br/>            OnCheckedChanged="Check_Change" runat="server" /&gt;<br/><br/>
                    &lt;asp:CheckBox ID="ReadOnlyCheckBox" Text="ReadOnly" Checked="False" AutoPostBack="True"<br/>            OnCheckedChanged="Check_Change" runat="server" /&gt;<br/><br/>        &lt;asp:Button ID="SubmitButton" Text="Submit" OnClick="SubmitButton_Click" runat="server" /&gt;<br/>        &lt;hr /&gt;<br/>        &lt;asp:Label ID="Message" runat="server" /&gt;<br/>
                &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="P:Telerik.WebControls.RadTextBox.Columns">
            <summary>Gets or sets the display width of the RadTextBox in characters.</summary>
            <value>
            The display width, in characters, of the RadTextBox. The default is 0, which
            indicates that the property is not set.
            </value>
            <exception cref="T:System.ArgumentOutOfRangeException" caption="System.ArgumentOutOfRangeException">The specified width is less than 0.</exception>
            <example>
            	<para>The following code example demonstrates how to use the Columns property to
                specify a width of 2 characters for the RadTextBox control. This example has a text
                box that accepts user input, which is a potential security threat. By default,
                ASP.NET Web pages validate that user input does not include script or HTML
                elements.</para>
            	<para>[C#]</para>
            	<pre>
            &lt;/%@ Page Language="C#" AutoEventWireup="True" /%&gt;<br/>
            		<br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/>
            		<br/>&lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>    &lt;title&gt;RadTextBox Example &lt;/title&gt;<br/>
            		<br/>    &lt;script runat="server"&gt;<br/>
            		<br/>        protected void AddButton_Click(Object sender, EventArgs e)<br/>        {<br/>            int Answer;<br/>
            		<br/>            Answer = Convert.ToInt32(Value1.Text) + Convert.ToInt32(Value2.Text);<br/>
            		<br/>            AnswerMessage.Text = Answer.ToString();<br/>
            		<br/>        }<br/>
            		<br/>    &lt;/script&gt;<br/>
            		<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>            RadTextBox Example<br/>        &lt;/h3&gt;<br/>
            		<br/>        &lt;table&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/>                    Enter integer values into the text boxes.<br/>                    &lt;br /&gt;<br/>
                                Click the Add button to add the two values.<br/>                    &lt;br /&gt;<br/>                    Click the Reset button to reset the text boxes.<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/>
            		<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr align="center"&gt;<br/>                &lt;td&gt;<br/>                    &lt;rad:RadTextBox ID="Value1" Columns="2" MaxLength="3" Text="1" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    +<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    &lt;rad:RadTextBox ID="Value2" Columns="2" MaxLength="3" Text="1" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    =<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    &lt;asp:Label ID="AnswerMessage" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="2"&gt;<br/>                    &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Value1"<br/>
                                    ErrorMessage="Please enter a value.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>                    &lt;asp:RangeValidator ID="Value1RangeValidator" ControlToValidate="Value1" Type="Integer"<br/>                        MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>
                                    Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td colspan="2"&gt;<br/>                    &lt;asp:RequiredFieldValidator ID="Value2RequiredValidator" ControlToValidate="Value2"<br/>                        ErrorMessage="Please enter a value.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value2RangeValidator" ControlToValidate="Value2" Type="Integer"<br/>                        MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>                        Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>
                            &lt;td&gt;<br/>                    &amp;nbsp<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr align="center"&gt;<br/>                &lt;td colspan="4"&gt;<br/>                    &lt;asp:Button ID="AddButton" Text="Add" OnClick="AddButton_Click" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>
            		<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>        &lt;/table&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;<br/>
            	</pre>
            	<para>[Visual Basic]</para>
            	<pre>
            &lt;/%@ Page Language="VB" AutoEventWireup="True" /%&gt;<br/><br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/><br/>&lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>
                &lt;title&gt;TextBox Example &lt;/title&gt;<br/><br/>    &lt;script runat="server"&gt;<br/><br/>      Protected Sub AddButton_Click(sender As Object, e As EventArgs)<br/><br/>         Dim Answer As Integer<br/><br/>         Answer = Convert.ToInt32(Value1.Text) + Convert.ToInt32(Value2.Text)<br/><br/>         AnswerMessage.Text = Answer.ToString()<br/><br/>      End Sub<br/><br/>
                &lt;/script&gt;<br/><br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>            RadTextBox Example<br/>        &lt;/h3&gt;<br/>        &lt;table&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/>                    Enter integer values into the text boxes.<br/>
                                &lt;br /&gt;<br/>                    Click the Add button to add the two values.<br/>                    &lt;br /&gt;<br/>                    Click the Reset button to reset the text boxes.<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="5"&gt;<br/><br/>                &lt;/td&gt;<br/>
                        &lt;/tr&gt;<br/>            &lt;tr align="center"&gt;<br/>                &lt;td&gt;<br/>                    &lt;rad:RadTextBox ID="Value1" Columns="2" MaxLength="3" Text="1" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    +<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>
                                &lt;rad:RadTextBox ID="Value2" Columns="2" MaxLength="3" Text="1" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    =<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    &lt;asp:Label ID="AnswerMessage" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>
                        &lt;/tr&gt;<br/>            &lt;tr&gt;<br/>                &lt;td colspan="2"&gt;<br/>                    &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Value1"<br/>                        ErrorMessage="Please enter a value.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                                &lt;asp:RangeValidator ID="Value1RangeValidator" ControlToValidate="Value1" Type="Integer"<br/>                        MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>                        Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>
                            &lt;td colspan="2"&gt;<br/>                    &lt;asp:RequiredFieldValidator ID="Value2RequiredValidator" ControlToValidate="Value2"<br/>                        ErrorMessage="Please enter a value.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>                    &lt;asp:RangeValidator ID="Value2RangeValidator" ControlToValidate="Value2" Type="Integer"<br/>
                                    MinimumValue="1" MaximumValue="100" ErrorMessage="Please enter an integer &lt;br /&gt; between than 1 and 100.&lt;br /&gt;"<br/>                        Display="Dynamic" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/>                    &amp;nbsp<br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>
                        &lt;tr align="center"&gt;<br/>                &lt;td colspan="4"&gt;<br/>                    &lt;asp:Button ID="AddButton" Text="Add" OnClick="AddButton_Click" runat="server" /&gt;<br/>                &lt;/td&gt;<br/>                &lt;td&gt;<br/><br/>                &lt;/td&gt;<br/>            &lt;/tr&gt;<br/>        &lt;/table&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            </requirements>
            <remarks>
            .NET Framework<br/>
            Supported in: 3.0, 2.0, 1.1, 1.0
            </remarks>
        </member>
        <member name="P:Telerik.WebControls.RadTextBox.Wrap">
            <summary>
            Gets or sets a value indicating whether the text content wraps within a multiline
            RadTextBox.
            </summary>
            <value>
            true if the text content wraps within a multiline RadTextBox; otherwise, false.
            The default is true.
            </value>
            <remarks>
            Use the Wrap property to specify whether the text displayed in a multiline
            RadTextBox control automatically continues on the next line when the text reaches the
            end of the control. This property is applicable only when the RadTextMode property is
            set to MultiLine
            </remarks>
            <example>
            	<para>The following code example demonstrates how to use the Wrap property to wrap
                text entered in the RadTextBox control. This example has a text box that accepts
                user input, which is a potential security threat. By default, ASP.NET Web pages
                validate that user input does not include script or HTML elements.</para>
            	<para>[C#]</para>
            	<pre>
            &lt;/%@ Page Language="C#" AutoEventWireup="True" /%&gt;  <br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;  <br/>&lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>
                "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>    &lt;title&gt;MultiLine RadTextBox Example &lt;/title&gt;<br/>
            		<br/>    &lt;script runat="server"&gt;<br/>
            		<br/>        protected void SubmitButton_Click(Object sender, EventArgs e)<br/>        {<br/>
            		<br/>            Message.Text = "Thank you for your comment: &lt;br /&gt;" + Comment.Text;<br/>
            		<br/>        }<br/>
            		<br/>        protected void Check_Change(Object sender, EventArgs e)<br/>        {<br/>
            		<br/>            Comment.Wrap = WrapCheckBox.Checked;<br/>            Comment.ReadOnly = ReadOnlyCheckBox.Checked;<br/>
            		<br/>        }<br/>
            		<br/>    &lt;/script&gt;<br/>
            		<br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>            MultiLine RadTextBox Example<br/>        &lt;/h3&gt;<br/>
                    Please enter a comment and click the submit button.<br/>        &lt;br /&gt;<br/>        &lt;br /&gt;<br/>        &lt;rad:RadTextBox ID="Comment" TextMode="MultiLine" Columns="50" Rows="5" runat="server" /&gt;<br/>        &lt;br /&gt;<br/>
                    &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Comment"<br/>            ErrorMessage="Please enter a comment.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                    &lt;asp:CheckBox ID="WrapCheckBox" Text="Wrap Text" Checked="True" AutoPostBack="True"<br/>            OnCheckedChanged="Check_Change" runat="server" /&gt;<br/>
            		<br/>        &lt;asp:CheckBox ID="ReadOnlyCheckBox" Text="ReadOnly" Checked="False" AutoPostBack="True"<br/>            OnCheckedChanged="Check_Change" runat="server" /&gt;<br/>
            		<br/>        &lt;asp:Button ID="SubmitButton" Text="Submit" OnClick="SubmitButton_Click" runat="server" /&gt;<br/>        &lt;hr /&gt;<br/>        &lt;asp:Label ID="Message" runat="server" /&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;<br/>
            	</pre>
            	<para>[Visual Basic]</para>
            	<pre>
            &lt;/%@ Page Language="VB" AutoEventWireup="True" /%&gt;<br/><br/>&lt;/%@ Register Assembly="RadInput.Net2" Namespace="Telerik.WebControls" TagPrefix="rad" /%&gt;<br/><br/>&lt;!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"<br/>
                "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"&gt;<br/>&lt;html&gt;<br/>&lt;head&gt;<br/>    &lt;title&gt;MultiLine RadTextBox Example &lt;/title&gt;<br/><br/>    &lt;script runat="server"&gt;<br/><br/>
                  Protected Sub SubmitButton_Click(sender As Object, e As EventArgs )<br/><br/>         Message.Text = "Thank you for your comment: &lt;br /&gt;" + Comment.Text<br/><br/>      End Sub<br/><br/>      Protected Sub Check_Change(sender As Object, e As EventArgs )<br/><br/>
                     Comment.Wrap = WrapCheckBox.Checked<br/>         Comment.ReadOnly = ReadOnlyCheckBox.Checked<br/><br/>      End Sub<br/><br/>    &lt;/script&gt;<br/><br/>&lt;/head&gt;<br/>&lt;body&gt;<br/>    &lt;form id="form1" runat="server"&gt;<br/>        &lt;h3&gt;<br/>
                        MultiLine RadTextBox Example<br/>        &lt;/h3&gt;<br/>        Please enter a comment and click the submit button.<br/>        &lt;br /&gt;<br/>        &lt;br /&gt;<br/>        &lt;rad:RadTextBox ID="Comment" TextMode="MultiLine" Columns="50" Rows="5" runat="server" /&gt;<br/>
                    &lt;br /&gt;<br/>        &lt;asp:RequiredFieldValidator ID="Value1RequiredValidator" ControlToValidate="Comment"<br/>            ErrorMessage="Please enter a comment.&lt;br /&gt;" Display="Dynamic" runat="server" /&gt;<br/>
                    &lt;asp:CheckBox ID="WrapCheckBox" Text="Wrap Text" Checked="True" AutoPostBack="True"<br/>
                        OnCheckedChanged="Check_Change" runat="server" /&gt;<br/><br/>        &lt;asp:CheckBox ID="ReadOnlyCheckBox" Text="ReadOnly" Checked="False" AutoPostBack="True"<br/>            OnCheckedChanged="Check_Change" runat="server" /&gt;<br/><br/>
                    &lt;asp:Button ID="SubmitButton" Text="Submit" OnClick="SubmitButton_Click" runat="server" /&gt;<br/>        &lt;hr /&gt;<br/>        &lt;asp:Label ID="Message" runat="server" /&gt;<br/>    &lt;/form&gt;<br/>&lt;/body&gt;<br/>&lt;/html&gt;
                </pre>
            </example>
            <requirements>
            	<para>Windows 98, Windows Server 2000 SP4, Windows Server 2003, Windows XP Media
                Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP
                Starter Edition</para>
            	<para>The Microsoft .NET Framework 3.0 is supported on Windows Vista, Microsoft
                Windows XP SP2, and Windows Server 2003 SP1.</para>
            	<para>.NET Framework<br/>
                Supported in: 3.0, 2.0, 1.1, 1.0</para>
            </requirements>
        </member>
        <member name="T:Telerik.WebControls.DisplayFormatPosition">
            <summary>
            Summary description for DisplayFormatPosition.
            </summary>
        </member>
        <member name="P:Telerik.WebControls.InputClientEvents.OnEnumerationChanged">
            <summary>
            Fired whenever the value of any enumeration mask part has changed.
            </summary>
            <remarks>
            Note this event is effective only for the RadMaskedTextBox control.
            </remarks>
        </member>
        <member name="P:Telerik.WebControls.InputClientEvents.OnMoveUp">
            <summary>
            Fired whenever the user increases the value of any enumeration or numeric range mask part of RadMaskedTextBox 
            (with either keyboard arrow keys or mouse wheel).
            </summary>
            <remarks>
            Note this event is effective only for the RadMaskedTextBox control.
            </remarks> 
        </member>
        <member name="P:Telerik.WebControls.InputClientEvents.OnMoveDown">
            <summary>
            Fired whenever the user decreases the value of any enumeration or numeric range mask part of RadMaskedTextBox 
            (with either keyboard arrow keys or mouse wheel).
            </summary>
            <remarks>
            Note this event is effective only for the RadMaskedTextBox control.
            </remarks>  
        </member>
        <member name="P:Telerik.WebControls.InputClientEvents.OnShowHint">
            <summary>
            Fired after the hint is shown.
            </summary>
            <remarks>
            Note this event is effective only for the RadMaskedTextBox control.
            </remarks>  
        </member>
        <member name="P:Telerik.WebControls.InputIncrementSettings.Step">
            <summary>
                <para>Gets or sets the value to increment or decrement the spin box when the up or down buttons are clicked.</para>
            </summary>
        </member>
        <member name="P:Telerik.WebControls.InputIncrementSettings.InterceptArrowKeys">
            <summary>
                <para>Gets or sets a value indicating whether the user can use the UP ARROW and DOWN ARROW keys to increment/decrement values.</para>
            </summary>
        </member>
        <member name="P:Telerik.WebControls.InputIncrementSettings.InterceptMouseWheel">
            <summary>
                <para>Gets or sets a value indicating whether the user can use the MOUSEWHEEL to increment/decrement values.</para>
            </summary>
        </member>
        <member name="T:Telerik.WebControls.SelectionOnFocus">
            <summary>
            Summary description for AutoPostBackControl.
            </summary>
        </member>
    </members>
</doc>
