ACTIPRO MDI + TELERIK REPORTVIEWER REPRO
========================================

This project is a minimal reproduction based on the PTX structure supplied:

  MainWindow (PTX PtxRibbonWindow role)
    -> ActiproShell
       -> ActiproDockSite : Actipro DockSite
          -> Workspace.Content = StandardMdiHost
             -> ActiproDocWin : Actipro DocumentWindow
                -> PtxDoc
                   -> TelerikReportViewerDoc : ReportViewer

The Telerik assemblies from the supplied WpfApp1.zip are included in dll\.
The project targets .NET Framework 4.8 and Telerik Reporting/ReportViewer 18.0.24.305
with Telerik UI for WPF 2024.1.130.45.

IMPORTANT ACTIPRO DEPENDENCY
----------------------------
The supplied WpfApp1.zip did not contain Actipro assemblies. The Actipro Docking
assembly is proprietary and is not redistributed here. To build this project,
copy the Actipro WPF Docking and its dependent Actipro WPF assemblies from your
licensed PTX development installation into dll\, then make sure the HintPath
entries in WpfApp1.csproj point to the actual filenames. This project cannot be
compiled or runtime-verified in this environment because those assemblies are
not present.

TEST
----
1. Open the solution in Visual Studio on Windows.
2. Resolve the Actipro references as described above.
3. Run the application.
4. Open Report A and Report B.
5. Open the built-in Search dialog from Report A.
6. Close Report A using the Actipro document-window close button.
7. Confirm the Search dialog for Report A closes while the main window and
   Report B remain open.
8. Repeat with Report B.

The cleanup is wired to ActiproDockSite.WindowClosed. The Telerik viewer cleanup
calls DisposeViewerResources() from the closed document's OnClose lifecycle.
This sample deliberately does not use a TabControl or a separate WPF Window per
report.
